Bedienungsanleitung Lexmark S310 Series (Seite 126 von 143) (Englisch)

612382

126

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

ASSIGN STATIC IP ADDRESSES TO ALL DEVICES IN THE NETWORK

Most wireless networks use a DHCP server (Dynamic Host Configuration Protocol) built in to the wireless router to

assign IP addresses to clients on the wireless network. DHCP addresses are assigned when they are needed, as when

a new device is added to the wireless network or when it is powered on. Wireless devices must send a request to

the router, and receive an IP address in response so they can function on the network. Because the wireless router

performs many other tasks besides assigning addresses, it sometimes does not respond quickly enough with an

address. The requesting device sometimes gives up before it receives an address.

Try assigning static IP addresses to the devices in your network to resolve this issue.

To assign a static IP address to the printer:

1 Complete the wireless setup, allowing the printer to receive a DHCP address from a DHCP server on the network.

2 Print a network setup page to see what IP address is currently assigned to the printer.

3 Open a Web browser and then type the printer IP address in the address field. Press Enter.

4 Click Configuration > TCP/IP > Set static IP address.

5 In the Address field, type the IP address you want to assign to the printer, and then click Submit.

Confirm that the IP address is updated by typing the static IP address in the browser address field and checking to

see if the printer Web page reloads. For more information on assigning static IP addresses, see the documentation

that came with your router and operating system.

CHECK FOR KNOWN ISSUES WITH THE ACCESS POINT

Some wireless routers have documented defects that were identified and resolved by the manufacturers. Visit the

company Web site of the router manufacturer. Check for firmware updates and other advice from the manufacturer.

See the documentation that came with your wireless router if you are not sure how to reach the manufacturer Web

site.

CHECK FOR WIRELESS NETWORK ADAPTER UPDATES

If you are having trouble printing from one particular computer, then check the Web site of the manufacturer of the

wireless network adapter card in that computer. It is possible that there is an updated driver available that could

resolve the issue.

CHANGE ALL NETWORK DEVICES TO THE SAME TYPE

While it is possible to successfully mix 802.11b, 802.11g, and 802.11n devices on the same wireless network, the

faster devices will sometimes prevent the slower devices from communicating.

Try turning on only the network devices of the same type and see if network communications improve. If this solves

the problem, then you may want to upgrade your older devices with newer wireless network adapters.

PURCHASE A NEW ROUTER

If your router is several years old, then it may not be fully compatible with the newer wireless devices on your network.

Consider purchasing a newer router that is fully compliant with the 802.11 IEEE specifications.

Troubleshooting 126

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Lexmark S310 Series Seite 126

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Lexmark S310 Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info