Bedienungsanleitung LG 24MT49S (Seite 17 von 21) (Englisch)

685819

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

ENGENGLISH

Maintenance

Cleaning your TV

Clean your TV regularly to keep the best performance and to extend

the product lifespan.

y Make sure to turn the power o and disconnect the power cord

and all other cables rst.

y When the TV is left unattended and unused for a long time,

disconnect the power cord from the wall outlet to prevent

possible damage from lightning or power surges.

Screen, frame, cabinet and stand

To remove dust or light dirt, wipe the surface with a dry, clean, and

soft cloth.

To remove major dirt, wipe the surface with a soft cloth dampened

in clean water or a diluted mild detergent. Then wipe immediately

with a dry cloth.

y Avoid touching the screen at all times, as this may result in

damage to the screen.

y Do not push, rub, or hit the screen surface with your ngernail or a

sharp object, as this may result in scratches and image distortions.

y Do not use any chemicals as this may damage the product.

y Do not spray liquid onto the surface. If water enters the TV, it may

result in re, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

Preventing “Image burn” or “Burn-in” on

your TV screen

y If a xed image displays on the TV screen for a long period of time,

it will be imprinted and become a permanent disgurement on

the screen. This is “image burn” or “burn-in” and not covered by

the warranty.

y If the aspect ratio of the TV is set to 4:3 for a long period of time,

image burn may occur on the letterboxed area of the screen.

y Avoid displaying a xed image on the TV screen for a long period

of time (2 or more hours for LCD) to prevent image burn.

Troubleshooting

Cannot control the TV with the remote control.

y Check the remote control sensor on the product and try again.

y Check if there is any obstacle between the product and the remote

control.

y Check if the batteries are still working and properly installed (

to , to ).

No image display and no sound is produced.

y Check if the product is turned on.

y Check if the power cord is connected to a wall outlet.

y Check if there is a problem in the wall outlet by connecting other

products.

The TV turns o suddenly.

y Check the power control settings. The power supply may be

interrupted.

y Check if the Sleep Timer / Timer Power Off is activated in the

Timers settings.

y Check if the Auto Power Off is activated in the General Eco

Mode settings. (Depending on model)

y If there is no signal while the TV is on, the TV will turn o

automatically after 15 minutes of inactivity.

When connecting to the PC (HDMI), 'No Signal' or ‘Invalid

Format’ is displayed.

y Turn the TV o/on using the remote control.

y Reconnect the HDMI cable.

y Restart the PC with the TV on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG 24MT49S Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG 24MT49S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info