Bedienungsanleitung LG 32LJ590 (Seite 16 von 38) (Englisch)

664389

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

ENGLISH

• Take care not to touch the ventilation openings when watching the

TV for long periods as the ventilation openings may become hot.

This does not affect the operation or performance of the product.

• Periodically examine the cord of your appliance, and if its

appearance indicates damage or deterioration, unplug it,

discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized servicer.

• Prevent dust collecting on the power plug pins or outlet. This may

cause a fire hazard.

• Protect the power cord from physical or mechanical abuse, such as

being twisted, kinked, pinched, closed in a door, or walked upon.

Pay particular attention to plugs, wall outlets, and the point where

the cord exits the appliance.

• Do not press strongly upon the panel with a hand or sharp object

such as nail, pencil or pen, or make a scratch on it, as it may

causedamage to screen.

• Avoid touching the screen or holding your finger(s) against it for

long periods of time. Doing so may produce some temporary or

permanent distortion/damage to screen.

• As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if you turn off this

unit by SWITCH.

• When unplugging the cable, grab the plug and unplug it, by

pulling at the plug. Don’t pull at the cord to unplug the power cord

from the power board, as this could be hazardous.

• When moving the product, make sure you turn the power off first.

Then, unplug the power cables, antenna cables and all connecting

cables. The TV set or power cord may be damaged, which may

create a fire hazard or cause electric shock.

• When moving or unpacking the product, work in pairs because the

product is heavy. Otherwise, this may result in injury.

• Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such

as power supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

• Do not use high voltage electrical goods near the TV (e.g. electric

mosquito-swatter). This may result in product malfunction.

• When cleaning the product and its components, unplug the power

first and wipe it with a soft cloth. Applying excessive force may

cause scratches or discolouration. Do not spray with water or wipe

with a wet cloth. Never use glass cleaner, car or industrial shiner,

abrasives or wax, benzene, alcohol etc., which can damage the

product and its panel. Otherwise, this may result in fire, electric

shock or product damage (Deformation, corrosion or breakage).

Preparing

• If the TV is turned on for the first time after it was shipped from

the factory, initialization of the TV may take a few minutes.

(Depending on model)

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual.

• The available menus and options may differ from the input source

or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending on the

model.

• Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports USB 2.0 if the USB cable or USB

memory stick does not fit into your TV’s USB port.

* A

10 mm

* B

18 mm

• Use a certified cable with the HDMI logo attached.

• If you do not use a certified HDMI cable, the screen may not display

or a connection error may occur. (Recommended HDMI Cable Types)

- High-Speed HDMI®/

Cable (3 m or less)

- High-Speed HDMI®/

Cable with Ethernet (3 m or less)

• How to use the ferrite core (Depending on model)

- Use the ferrite core to reduce the electromagnetic interference in

the power cord. Wind the power cord on the ferrite core once.

[Wall side]

[TV side]

10 cm (+ / -2 cm)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG 32LJ590 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG 32LJ590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info