Bedienungsanleitung LG 50UP7800 (Seite 17 von 24) (Englisch)

771935

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

󱂄 Troubleshooting

Cannot control the

TV with the remote

control.

•Check the remote control sensor on the product and try again.

•Check if there is any obstacle between the product and the remote control.

•Check if the batteries are still working and properly installed ( to , to ).

No image display and

no sound is produced.

•Check if the product is turned on.

•Check if the power cord is connected to a wall outlet.

•Check if there is a problem in the wall outlet by connecting other products.

The TV turns off

suddenly.

•Check the power control settings. The power supply may be interrupted.

•Check if the auto-off function is activated on the settings related time.

•If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

When connecting to

the PC (HDMI), no

signal is detected.

•Turn the TV off/on using the remote control.

•Reconnect the HDMI cable.

•Restart the PC with the TV on.

Abnormal Display •If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there

is nothing wrong with product.

•This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/

or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a

malfunction and does not affect the performance and reliability of the product. This phenomenon also

occurs in third-party products and is not subject to exchange or refund.

•You may find different brightness and colour of the panel depending on your viewing position(left/right/

top/down).

This phenomenon occurs due to the characteristic of the panel.

It is not related with the product performance, and it is not malfunction.

•Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed

image on the TV screen for a long period of time.

Generated Sound •“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic

thermal contraction due to temperature and humidity. This noise is common for products where thermal

deformation is required.

•Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching

circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

•When cleaning the product, be careful not to allow any liquid or foreign objects to

enter the gap between the upper, left or right side of the panel and the guide panel.

(Depending on model)

•Make sure to wring any excess water or cleaner from the cloth.

•Do not spray water or cleaner directly onto the TV screen.

•Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG 50UP7800 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG 50UP7800

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info