675404
22
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
22
Checking Air Quality on the Sta-
tus Panel
You may check the overall air quality, dust
concentration, and smell concentration on
the status panel.
Overall air quality
: You can check the
color (overall air quality) on the
status panel to determine the overall air
quality.
Dust concentration
: You can check the
dust concentration by looking at the dust
concentration value and the particle size
indicator color. It shows the worst status
among the PM 10 (ne) / PM 2.5 (ultra-ne)
/ PM 1.0 (super ultra-ne dust).
If the dust concentrations of all
categories are 'good', the concentration
of the 'PM 10' is displayed.
If it is worse than 'moderate', the
color and concentration of the dust
with the highest contamination level
are displayed. If they share the same
contamination level, the contamination
level is displayed according to the
following order: PM 1.0, PM 2.5 and
PM 10.
Smell concentration
: You can check
the color (smell concentration) on
the status panel to determine the smell
concentration.
[Example of the Display Showing Air
Quality]
Overall air quality
Smell
concentration
color
Dust particle
size and
concentration
color
Dust concentration
The above picture displays
PM10/PM2.5/
PM1.0
, meaning that the concentration of
super ultra-ne dust is higher than those of
ne dust and ultra-ne dust.
While the color of the dust particle size
is solely determined based on the dust
concentration and the color of the (smell
concentration) is solely determined based
on the smell concentration, the color of the
(overall air quality) is determined
based on the worse cause between the dust
and smell.
If the smell is ‘normal’ and the PM 1.0 (super
ultra-ne dust) concentration is
50 μg/m
3
,
which is ‘unhealthy’, the overall air quality is
displayed in orange as the worst cause is the
dust. On the other hand, if the smell is ‘very
strong’, the overall air quality is displayed in red
because the smell becomes the worst cause.
Checking the Dust
Concentration
You can check the airborne dust
concentration by its particle size.
Press the
Indicator
button during the
operation.
Whenever you press the button, the
display changes in the following order:
PM10
PM2.5
PM1.0
.
The concentration of the selected dust
particle is displayed for about 10 seconds.
D+_Air_Cleaner_16PY_UG_EU_ENG_DE_ES_IT_FR_POL_SV_170726.indb 22 2017-08-17 �� 5:30:12
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG AS55GD wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info