Bedienungsanleitung LG CM4541 X-Boom (Seite 25 von 32) (Englisch)

625209

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Operating 25

Operating

Listening to music stored on

the Bluetooth devices

Before you start the pairing procedure, make

sure the Bluetooth feature is turned on in to your

Bluetooth device. Refer to your Bluetooth device’s

user guide. Once a pairing operation is performed,

it does not need to be performed again.

1. Select the Bluetooth function by using the

FUNCTION.

“BT READY” appears on the display window.

2. Operate the Bluetooth device and perform the

pairing operation. When searching for this unit

with the Bluetooth device, a list of the devices

found may appear in the Bluetooth device

display depending on the type of Bluetooth

device.Your unit appears as “LG MINI (XX:XX)”.

XX:XX means the last four digits of BT address.

For example, if your unit has a BT address such as

9C:02:98:4A:F7:08, you will see “LG MINI (F7:08)”

on your Bluetooth device.

Note

3. Enter the PIN code.

PIN code : 0000

Depending on the Bluetooth device type,

some device have a dierent pairing way.

Note

4. When this unit successfully paired with your

Bluetooth device, “BT PAIR” appears in the

display window.

5. Listening to music.

To play a music stored on your Bluetooth device,

refer to your Bluetooth device’s user guide.

According to your mobile phone’s volume level,

the volume level of Bluetooth will be adjusted.

Sound from the main set can be distorted

if you raise the volume of Bluetooth device

up to two-thirds or more.

When you use the Bluetooth function,

adjust the volume of a Bluetooth device to

a proper level to listen to.

Note

When using Bluetooth® technology, you

have to make a connection between the

unit and the bluetooth device as close as

possible and keep the distance.

However it may not work well in the case

below :

There is a obstacle between the unit and

the bluetooth device.

There is a device using same frequency

with Bluetooth® technology such as a

medical equipment, a microwave or a

wireless LAN device.

You should connect your Bluetooth device

to this unit again when you restart it.

The sound may be interrupted when

the connection interfered by the other

electronic wave.

You cannot control the Bluetooth device

with this unit.

Pairing is limited one Bluetooth device per

one unit and multi-pairing is not supported.

Depending on the type of the device,

you may not be able to use the Bluetooth

function.

You can enjoy wireless system using phone,

MP3, Notebook, etc..

When not connected the Bluetooth, “BT” and

“BT READY” appears on the display window.

When someone stands and interrupts

communication between Bluetooth device

and the player, the connection will be

disconnected.

The more distant between the unit and

the bluetooth device, the lower the sound

quality becomes.

When Bluetooth connection is

disconnected, connect the bluetooth device

to the unit again.

After your device is connected to the unit

via Bluetooth, the function switches to BT

automatically. But while recording, it doesn’t

switch to BT.

Note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG CM4541 X-Boom Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG CM4541 X-Boom

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info