Bedienungsanleitung LG F4Y511GBLA1 (Seite 35 von 52) (Englisch)

815834

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

SMART FUNCTIONS

ENGLISH

Run the

LG ThinQ

application and sign in with

your existing account or create an LG account

to sign in.

Touch the add (

) button on the

LG ThinQ

application to connect your LG appliance.

Follow the instructions in the application to

complete the process.

NOTE

• To verify the Wi-Fi connection, check that the Wi-

Fi indicator on the control panel is lit.

• The appliance supports 2.4 GHz Wi-Fi networks

only. To check your network frequency, contact

your Internet service provider or refer to your

wireless router manual.

•

LG ThinQ

is not responsible for any network

connection problems or any faults,

malfunctions, or errors caused by network

connection.

• The surrounding wireless environment can

make the wireless network service run slowly.

• If the distance between the appliance and the

wireless router is too far, the signal strength

becomes weak. It may take a long time to

connect or installation may fail.

• If the appliance is having trouble connecting to

the Wi-Fi network, it may be too far from the

router. Purchase a Wi-Fi repeater (range

extender) to improve the Wi-Fi signal strength.

• The network connection may not work properly

depending on the Internet service provider.

• The Wi-Fi connection may not connect or may be

interrupted because of the home network

environment.

• The appliance cannot be connected due to

problems with the wireless signal transmission.

Unplug the appliance and wait about a minute

before trying again.

• If the firewall on your wireless router is enabled,

disable the firewall or add an exception to it.

• The wireless network name (SSID) should be a

combination of English letters and numbers. (Do

not use special characters.)

• Smartphone user interface (UI) may vary

depending on the mobile operating system (OS)

and the manufacturer.

• If the security protocol of the router is set to

WEP

, you may fail to set up the network. Please

change it to other security protocols (

WPA2

recommended) and connect the product again.

• To disable the Wi-Fi function, press and hold the

Wi-Fi

button for 3 seconds. The Wi-Fi indicator

will be turned off.

• To reconnect the appliance or add another user,

press and hold the

Wi-Fi

button for 3 seconds to

temporarily turn it off. Run the

LG ThinQ

application and follow the instructions in the

application to connect the appliance.

Activating Network Connection

Run the

LG ThinQ

application.

Select and touch the

Front Load Washer

in the

application.

Press the

Power

button on the control panel.

Press and hold

Wi-Fi

button for 3 seconds on

the control panel.

• The Wi-Fi LED blinks during the connection

process.

Using the Appliance Remotely

Remote Start

Use a smartphone to control your appliance

remotely. You can also monitor your cycle

operation so you know how much time is left in the

cycle.

Using this function

Put the clothes into the drum.

global_main.book.book Page 35 Friday, May 12, 2023 10:55 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG F4Y511GBLA1 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info