Bedienungsanleitung LG GBP20 (Seite 12 von 136) (Englisch)

685775

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

INSTALLATION

Notes for Movement and

Transport

• Remove all food from inside the appliance.

Then, transport the appliance only after fixing

fragile parts such as shelves and the door

handle with tape. Failure to do so may cause

appliance damage.

• Pull the power plug out, insert and fix it into

the power plug hook at the rear or on top of

the appliance. Failure to do so may cause

damage to the power plug or floor scratch.

• When transporting the appliance, more than

two people should transport the appliance

carefully. Dropping the appliance, which is

extremely heavy, may cause personal injury or

appliance failure.

• When transporting the appliance over a long

distance, keep the appliance upright. The

appliance may fall over, causing malfunctions.

Never transport the appliance laying down as

it can cause a refrigerant circulation

malfunction when it is turned back on again.

Notes for Installation

• Install the appliance on a solid and flat area.

− If the appliance is installed on an uneven

floor, it can cause vibration and noise

causing the appliance to fall resulting in

injury. It could also cause the doors not to

close correctly and introduce moisture inside

the unit during operation.

− If the appliance front or rear is not level,

adjust

the front feet so that it can be

corrected. Severe cases may need the floor

to be packed out with strips of thin timber.

• Avoid placing the unit near heat sources,

direct sunlight or moisture.

• Connect the power supply cord (or plug) to

the outlet. Don't double up with other

appliances on the same outlet.

• After connecting the power supply cord (or

plug) to the outlet, Wait two or three hours

before you put food into the appliance. If you

add food before the appliance has cooled

completely, your food may spoil.

After installing the appliance, connect

the power plug into a socket outlet. Before

moving and discarding the appliance,

disconnect the plug from the socket outlet.

•

Dimensions and Clearances

Too small of a distance from adjacent items may result

in degradation of freezing capability and increased

electricity costs. Allow over 50mm clearance from each

adjacent wall when installing the appliance.

Ambient Temperature

The appliance is designed to operate within a limited

range of ambient temperatures, depending on the

climate zone. Do not use the appliance at a temperature

exceeding the limit.

The internal temperatures could be affected by the

location of the appliance, the ambient temperature,

the frequency of door opening and so on.

The climate class can be found on the rating label.

*Australia, India, Kenya

NOTE

The appliances rated from SN to T are intended

to be used at an ambient temperature between 10 ºC

and 43 ºC.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG GBP20 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG GBP20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info