41
How to dismantle parts
Separate the lamp by pulling it out
(
➂
)
while
slightly striking
(➀) and rotating
(
➁
)
the lamp cover.
Turn the bulb counterclockwise. Max. 40 W
bulb for
refrigerator is used and can be purchased at a
service center.
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Lamp in
refrigerator
compartment
Vegetable
compartment
cover
To remove the lamp cover, press the protrusion
under the lamp cover to the front and then pull
the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W
bulb for refrigerator is used and can be
purchased at a service center.
To remove a shelf, lift the left part of the shelf a
bit, push it to the direction , lift the right part to
the diretion , and take it out.
Lift the door rack to
direction
holding both
sides and pull it out to direction.
To remove the vegetable compartment cover,
pull out the vegetable compartment a bit to
the front , lift the front part of the vegetable
compartment cover as shown by , and take
it out.
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
NOTE
•
Be sure to remove parts from the refrigerator door when removing the vegetable
compartment and
snack corner.
NOTE
Separate the bin () to upward.
Separate the upper rack of the refreshment
center and then pull out the refreshment
center cover
(
)
.
The refreshment center can be removed
by pulling it upwards.
Refreshment
center
