Bedienungsanleitung LG GSL960PZVZ (Seite 34 von 46) (Englisch)

708732

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL,

MPL, and other open source licenses, that is

contained in this product, please visit http://

opensource.lge.com.

In addition to the source code, all referred

license terms, warranty disclaimers and

LG Electronics will also provide open source

code to you on CD-ROM for a charge covering

the cost of performing such distribution (such as

the cost of media, shipping, and handling) upon

email request to opensource@lge.com. This

offer is valid for a period of three years after our

last shipment of this product. This offer is valid

to anyone in receipt of this information.

Using Smart Diagnosis™

• For appliances with the or logo

Smart Diagnosis™ Through the

Customer Information Centre

Use this function if you need an accurate

diagnosis by an LG Electronics customer

information centre when the appliance

malfunctions or fails. Use this function only to

contact the service representative, not during

normal operation.

Press the Lock button to activate the lock

function.

• If the display has been locked for over 5

minutes, you must deactivate the lock and

then reactivate it.

Open the fridge door and then hold the

phone on the upper right speaker hole.

• Position the phone so that its microphone

is aligned with the speaker hole.

Press and hold the Freezer button for three

seconds or longer while continuing to hold

your phone to the speaker.

After the data transfer is complete, the

service agent will explain the result of the

Smart Diagnosis™.

NOTE

• Position the phone so that its microphone is

aligned with the speaker hole.

• The Smart Diagnosis™ sound is generated

after around three seconds.

• Hold the phone to the upper right speaker

hole and wait while the data is transmitted.

• Do not take the phone off the speaker hole

while the data is transmitted.

• The data transfer sound may be harsh to the

ear while the Smart Diagnosis™ data is being

transmitted, but do not take the phone off the

speaker hole for accurate diagnosis until the

data transfer sound has stopped.

• When the data transfer is complete, the

transfer completion message is displayed and

the control panel is automatically turned off

and then on again after a few seconds.

Afterwards the customer information centre

explains the diagnosis result.

• The Smart Diagnosis™ function depends on

the local call quality.

• The communication performance will improve

and you can transmit a better signal if you use

a land line home phone.

• If the Smart Diagnosis™ data transfer is poor

due to poor call quality, you may not receive

the best Smart Diagnosis™ service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG GSL960PZVZ Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG GSL960PZVZ

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info