Bedienungsanleitung LG OLED65B36 (Seite 4 von 13) (Englisch)

815751

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Installation

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or

damaged and for safe transportation regardless of its type and size.

•It is recommended to move the TV in the box or packing material that the

TV originally came in.

•Before moving or lifting the TV, disconnect the power cord and all cables.

•When holding the TV, the screen should face away from you to avoid

damage.

•Hold the side and bottom of the TV frame firmly. Make sure not to hold

the transparent part, speaker, or speaker grill area.

•When transporting a large TV, there should be at least 2 people.

•When transporting the TV, do not expose the TV to jolts or excessive

vibration.

•When transporting the TV, keep the TV upright, never turn the TV on its

side or tilt towards the left or right.

•Do not apply excessive pressure to cause flexing / bending of frame

chassis as it may damage screen.

•When handling the TV, be careful not to damage the protruding buttons.

•Avoid touching the screen at all times, as this may result in damage to

the screen.

•When attaching the stand to the TV set, place the screen facing down on

a cushioned table or flat surface to protect the screen from scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10cm (minimum) space from the wall for proper ventilation.

2 Connect the power cord to a wall outlet.

•Do not apply foreign substances (oils, lubricants, etc.) to the screw parts

when assembling the product. (Doing so may damage the product.)

•Do not use any unapproved items to ensure the safety and product life

span.

•Any damage or injuries caused by using unapproved items are not

covered by the warranty.

•If you install the TV on a stand, you need to take actions to prevent the

product from overturning. Otherwise, the product may fall over, which

may cause injury.

•When assembling the stand, ensure that all of the provided screws are

attached. If the screws are not fully tightened, the product may tilt or

tip over, resulting in damage. Tightening the screws with excessive force

may cause them to come off due to abrasion of the screw joint.

•If there is a problem with swivel angle adjustment, lift the product

slightly and put it back down. (Depending on model)

Securing TV to the Wall

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of

the TV.

• If there are bolts inserted at the eye-bolts position, remove the bolts

first.

2 Mount the wall brackets with the bolts to the wall. Match the location of

the wall bracket and the eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make

sure to keep the rope horizontal with the flat surface.

•Use a platform or cabinet that is strong and large enough to support the

TV securely.

•Brackets, bolts and ropes are not provided. You can obtain additional

accessories from your local dealer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG OLED65B36 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG OLED65B36

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info