815761
9
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
ENGLISH_index
9
Securing TV to the Wall
(Except for OLW480B)
Please use the TV close to the wall after installation.
How to x anchors and screws
(Except for OLW480B)
Please make sure that:
Check that the material and thickness of the wall and nishing
material comply with the installation manual. Before beginning
the mounting process, you must be sure the wall is able to support
the weight of the TV.
Should use the enclosed anchors and screws on crack-free concrete
walls.
Never install the product on a plasterboard or wall made of paper
or medium-density berboard (MDF). When it is necessary to
install the product on such wall, anchor screws must be fastened
to retaining walls (concrete) or wood Stud inside the nishing
material.
The wall mount should be attached to a stud.This usually will not
be a problem, but depending on individual circumstances, there
may be cases when the ability to mount into a studis not possible.
In this case, there are a variety of drywall anchors, such as toggle
bolts, which may provide a solution.If using drywall anchors,
please be sure the anchors and the wall have the ability to support
the weight of your TV. Please note that the supplied anchors may
not be the correct ones for your individual situation, so you should
check with a local professional.
Other unspecied walls must be capable of supporting pullout
loads of over 70kgf (686N) and shear loads of over 100kgf (980N)
per fastener.
Use an Ø 8mm drill bit for concrete and a hammer (impact) drill or
Ø 4mm drill bit for wood stud to drill holes.
(For installation on concrete wall)
1 Drill holes in anchor locations with a drill bit of Ø 8 mm to a depth
of 80 mm to 100 mm.
2 Clean the drilled holes.
3 Insert the enclosed anchors for xing the wall mount into the
holes. (Use a hammer when inserting anchors.)
Wall mounting anchor
4 Push the wall mount support closely toward the wall to match
the hole locations.
5 Tighten screws for xing the wall mount to the holes. At this
time, tighten the screws to a torque of between 45 kgf/cm to 60
kgf/cm.
Wall mounting screw
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für LG OLED65GX6 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von LG OLED65GX6

LG OLED65GX6 Bedienungsanleitung - Deutsch - 20 seiten

LG OLED65GX6 Bedienungsanleitung - Holländisch - 20 seiten

LG OLED65GX6 Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info