Bedienungsanleitung LG OLED97M39 (Seite 10 von 20) (Englisch)

815648

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

When Installing Behind the TV Screen

1. Place the Zero Connect Box lower than the wireless receiver of the

TV screen.

2. Before turning on the TV, ensure that the front LED of the Zero Connect

Box is facing the wireless signal receiver of the TV screen.

3. If the front LED is not facing the wireless signal receiver of the TV screen,

turn the dial on the top of the Zero Connect Box left or right to adjust the

direction of the sliding button to face the wireless signal receiver.

4. Adjust the sliding button on the Zero Connect Box in the opposite

direction of the top LED.

•Once the dial and sliding button adjustments are completed, the signal

transmission and reception path should be in the green direction shown

in the figure.

5. After turning on the TV, check if the top LED colour of the Zero Connect

Box is blue.

•If the LED is not blue, adjust the dial and sliding button further to

optimise the signal condition.

•Ensure that there are no obstacles in the antenna transmission path.

•Install the Zero Connect Box within 1m of the TV screen. (provided that

there are no obstacles in the way.)

•Position the Zero Connect Box between the legs of the floor stand so it

is not obstructed.

Connecting External Terminals

You can connect external devices such as cables, HDMI, and set-top boxes to

the TV. Press the Input button ( ) on the remote control, select [Home

Hub], and find the device you wish to connect from the menu displayed on

the screen.

•When used with an external device using a 60GHz frequency, the screen

may fail to display due to mutual interference.

•Set the appropriate resolution and frequency for the connected device.

Failure to do so may cause straining of the eyes.

•The detailed installation method may vary depending on the TV model.

Installing Antenna/Cable

•Insert the coaxial cable that transmits audio/video signals into the

antenna/cable input terminal or antenna input terminal on the back of

the Zero Connect Box.

•Be careful not to bend the copper wire when connecting the coaxial

cable.

•Use a signal amplifier if the signal is weak.

•When using one antenna for two or more TVs, use a signal splitter.

Note

•Do not apply oil or lubricant to the screws used during installation.

Doing so may cause the TV to malfunction.

Satellite dish

Connect the TV to a satellite dish to a satellite socket with a satellite RF cable

(75Ω). (Depending on model)

HDMI

•Use an HDMI certified cable (less than 3m) with the HDMI logo (high-

Speed HDMI®/™ cable).

•Turn off the power of the TV and all connected devices, and unplug them

from the socket before connecting the HDMI cable.

•Connecting a device that supports the HDMI Ultra HD Deep Colour

feature to the TV will provide a clearer image. If you connect a device

that does not support this feature and enable the feature, it may not

work properly. If problems arise, change the settings.

Note

•HDMI audio support formats may vary depending on the TV model.

•HDMI devices should have bezels less than 10mm thick and 18mm

width.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG OLED97M39 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG OLED97M39

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info