Bedienungsanleitung LG SH6 Soundbar (Seite 59 von 75) (Englisch)

637100

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

Operating 59

Operating

1. Select the Bluetooth function by using on the

remote control or F on the unit until the function

is selected.

Appears “BT” and then “BT READY” in display

window.

2. Operate the Bluetooth device and perform

the pairing operation. When searching for this

speaker on your Bluetooth device, a list of the

devices found may appear in the Bluetooth device

display depending on the type of Bluetooth

device. Your speaker appears as “LG SH6(XX:XX)”.

3. Select the “LG SH6(XX:XX)”.

XX:XX means the last four digits of

address. For example, if your unit has a

MAC address such as 20:C3:8F:C9:31:55,

you will see “LG SH6(31:55)” on your

Bluetooth device.

Depending on the Bluetooth device type,

some device have a different pairing way.

Enter the PIN code (0000) as needed.

Note

4. When this unit is successfully connected with

your Bluetooth device, “PAIRED” will appear on

the display window.

5. Listen to music.

To play music in your Bluetooth device, refer to

your Bluetooth device’s user guide.

According to your Bluetooth device’s volume level,

the volume level of Bluetooth will be adjusted.

When using Bluetooth technology, you have

to make a connection between the unit and

the bluetooth device as close as possible and

keep the distance.

However it may not work well in the case

below :

- There is a obstacle between the unit and

the bluetooth device.

- There is a device using same frequency

with Bluetooth technology such as a

medical equipment, a microwave or a

wireless LAN device.

Note

This unit supports Bluetooth auto pairing.

However it does not operate in the case

below:

- When you restart this unit.

- When you disconnect this unit by yourself.

- When you disconnect this unit on the

connected Bluetooth device.

The sound may be interrupted when the

connection is interfered with by the some

other electronic wave.

You cannot control the Bluetooth device with

this unit.

Pairing is limited to “One” Bluetooth device.

Multi-Pairing is not supported.

Depending on the type of the device, you may

not be able to use the Bluetooth function.

You can enjoy using Bluetooth when using

Phone, MP3, Notebook, etc..

The more distance between the unit and the

bluetooth device, the lower the sound quality

becomes.

The Bluetooth connection will be

disconnected when the unit is turned off or

the Bluetooth device gets too far from the

unit.

If the Bluetooth connection is disconnected,

connect the Bluetooth device again.

When a Bluetooth device is not connected,

“BT READY” appears on the display window.

If you set the Wi-Fi function in the state

of unconnected network, Bluetooth

and Wireless TV Sound Sync may not be

connected.

Note

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG SH6 Soundbar Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG SH6 Soundbar

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info