1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
OWNER’S MANUAL
Bluetooth® LG St ereo Headset
TONE-UFP8 / TONE-UFP8W
TONE-UFP8E
Copyright © 2021 - 2023 LG Electr onics Inc. All Rights Reserved
Google Play App Store
NOTE: For the best performance and
to prevent any damage to, or misuse of the
headset, please read all of the information
carefully prior to using the headset.
Any modications or changes to this
manual due to typographical errors or
inaccuracies of stated information shall
only be made by LG Electronics Inc.
[Charging Case]
[Listen to the Ambient Sound (LAS)]
The Listen to the Ambient Sound (LAS) function allows you to listen to the
ambient sound so that you can rec ognize the surr ounding situation and any
potential risks.
[Active Noise Cancellation (ANC)]
The Active Noise Cancellation (ANC) function blocks any ambient sound.
So, you can use the function to listen to the music or wat ch a video without
interferenc e.
[Earbuds]
*Make sur e that the charging terminal is no t soiled with foreign substanc e.
*The appearanc e and specications of the actual pr oduct may differ depending
on the model.
1. Overview
6. Listen to the Ambient Sound (LAS) / Active Noise Cancellation (ANC)
2. How to pair 3. W earing Earbuds
Charging port
Charging terminals
UVnano LED
Mood light
(When you open the
charging case, the mood
light turns on and off .)
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Speaker mesh
(Microphone)
Microphone
Microphone
T ouchpad
T ouchpad
Charging terminals
Charging terminals
Speaker mesh
(Microphone)
-(
-(
#MVFUPPUI 0/
~1m
T urn on the Bluetooth function on the mobile phone or the devic e to be
connected.
Open the cover of the char ging case with the earbuds mounted on the case.
Press and hold the touchpad o f the left or right earbud for 3 to 5 seconds
until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
When the Fast P air connection pop-up appear s on the top area o f the
mobile phone screen, tap it to c onnect. (It only supports Android™ 6.0
or higher , and requir es conguring Blue tooth and loc ation information
settings of the mobile device.)
If the pop-up does no t appear , select [LG- TONE-FP8] fr om the
Bluetooth menu on the mobile phone and c onnect it (for users o f iOS or
Android 5.0 or lower v ersions).
CAUTION: In the list of Blue tooth c onnected devic es, LG- TONE-FP8_LE
is not the corr ect model name for connection. Check the model name in
use and connect with the model name without “LE” .
If the earbud model name is abnormally displayed on the Android de vice,
change the model name in the Bluetooth menu o f Connected Devic e
Settings.
NOTE: T o c onnect with another devic e, perform the above pr ocedur e again.
Bluetooth name o f the product is “L G- TONE-FP8” .
Automatic Reconnection
The earbuds are c onnected automatically when you open the c over of the
charging case. If you close the cover of the charging c ase with both earbuds
mounted in the charging case, the earbuds ar e disc onnected.
Separate the earbuds fr om the charging case and adjust them so that
they t comfortably in your ears.
NOTE: Y ou can use ear gels that t your ears t o impro ve
Active Noise Canc eling (ANC) performanc e and enjo y
rich music sound.
When you wear the earbuds, you will hear a wearing detection alarm.
4. Playing Music
5. Mobile Calling F unctions 7. UVnano 8. Charging 9. Checking the Battery Status
-(
Function D escription
Play / Pause : T ouch the left or right earbud once.
Adjusting
the V olume
: T ouch the left(Decrease volume) or
right(Increase volume) earbud twic e.
Play Next : T ouch the left or right earbud three times.
NOTE: You can change the oper ation method of the function in the
touchpad settings of the LG T ONE Fr ee app.
The charging case has a built -in
UVnano LED, which allows you to
use your earbuds cleanly .
If you charge the earbuds wir ed after
mounting them on the charging case
and closing the cov er , the UVnano
LED operates for 5 minutes.
*UVnano is a c ompound word
derived fr om the words UV and its
unit, nanometer .
NOTE: The UVnano indicat or turns on blue while the UVnano LED is on.
The UVnano char ging case eliminates up to 99.9% of harmful
bacteria inside the earbud hole.
In the case of a white pr oduct, discolouring ma y occur in the
contact ar ea of the UVnano LED, but it does not affect the pr oduct
function.
CAUTION: Be aware that the temper ature o f the earbuds may rise
while the UVnano LED is on.
[Wired Char ging]
When the charging cable is c onnected, the char ging status is displayed in the
charging case.
NOTE: The earbuds and the charging c ase are char ged at the same time.
The charging port on the charging c ase cannot be used to supply power
to mobile phones, etc.
If earbuds are mounted in the char ging case, the earbuds’ battery status is
displayed. Otherwise, the charging case ’ s battery status is displayed.
If the earbuds are mounted in the char ging case while plugged in, the
UVnano pr ocess will c ommence for 5 minutes. Onc e this proc ess is
complete, the char ging case’ s batter y status will be displayed.
Battery
Status
Indicator
Remaining Battery
(charger not
connected)
Charging State
(charger
connected)
Red 20% or lower Charging
Y ellow 20% - 80% -
Green 80% or higher Fully char ged
NOTE: When the char ging case lid is closed, charging c ase battery
status is displayed. If the charging case has no r emaining char ge, there
will be no display and it cannot function. W e rec ommend you keep the
charging case char ged at all times as the earbuds are no t able to be
turned on and turned off independently .
T ouch and hold the left or right earbud to switch between the ANC mode
and the LAS mode.
You can set the LAS and ANC functions in the LG TONE F ree app.
You can congur e the Listen to the Ambient Sound mode and Conver sation
mode using the LG TONE F r ee app.
If you use the LAS or ANC function, the battery consumes faster , reducing
the time you can use the product.
You can use the LAS and ANC functions while being idle, listening to music,
or being on the phone.
*ANC is an acronym for Active Noise Canc ellation.
CAUTION: When the LAS mode is enabled, you may hear the ambient
sound become loud suddenly .
When using the ANC function outdoors, pa y attention to the
surrounding envir onment for safety .
Function Status Description
Answering
Calls Ringing T ouch the left or right earbud once.
Ending Calls T alking T ouch the left or right earbud twice.
Making Calls Idle If you mak e a call using a mobile phone, the
call is automatically c onnected to the headset.
Receiving
Calls while on
the Phone
T alking
If you touch the left or right earbud once,
the current call will go on hold, and you will
be able to answer an incoming c all.
If the previous c all is on hold, you can nish
the current call on the mobile phone.
(It works differently depending on the
mobile phone settings.)
Rejecting
Calls Ringing T ouch and hold the left or right earbud.
[Wireless Char ging]
Align the bottom cent er of the charging case with the c enter of the
wireless char ger .
NOTE: The wireless char ger is not pr ovided. The wireless char ging
function may not work in some wir eless charger s. Wireless char ging
feature char ges at a slower rate due t o less power being transmitted
to the charging case.
If you do wireless char ging, the UVnano LED ster ilizes the earbuds for
5 minutes before char ging.
NOTE: Actual pr oduct design may differ from images shown in manual.
* A mid-sized ear gel is attached to the earbud by default.
Make sur e authentic LG Electr onics components ar e used. Using a non-
authentic component may damage the pr oduct and thus void the warr anty .
Use the USB T ype C™ cable provided with the product.
CAUTION
LG T ONE Free™
Earbuds
UV Charging Case
USB T ype C™
Charging Cable
Extra Ear Gels
(small & large)
Owner’ s Manual