Settings
94
3. To use the headset, select the headset from the
registered devices, press the Option key and
then select 2. Connect.
4. To check that the selected headset has been
connected successfully, press the Option key. If it
is properly connected, 2. Disconnect will appear.
If it is not connected, 2. Connect will appear.
<Connecting a handsfree kit>
1. Menu > 9. Settings > 6. Connectivity > 1.
Bluetooth
2. Connect the handsfree kit according to the
procedures described in the Pairing Devices
section.
3. To use the handsfree kit, select the handsfree kit
from the registered devices, press the Option key
and then select 2. Connect.
4. To check that the selected handsfree kit has
been connected successfully, press the Option
key. If it is properly connected, 2. Disconnect will
appear. If it is not connected, 2. Connect will
appear.
Network settings (Menu 9.6.2)
Network selection
1. You can select either Automatic or Manual
network selection.
2. If you select Automatic, connection continues
according to the Automatic network selection
procedures. This setting is recommended for
best service and quality.
3. If you select Manual, all the currently 2G (GSM)
and 3G (UMTS) available networks are shown,
and you can select one of them for registration.
If the registration of the network has failed, then
all the currently available networks are listed
again, and you can select any other one for
registration.
Preferred lists
1. Select Preferred lists to display the preferred list
saved in the current SIM card.
2. You can edit and save a preferred list in the SIM
card by selecting the menu when the preferred
list is displayed.
Settings
