Bedienungsanleitung LG VPARQUET (Seite 30 von 48) (Englisch)

514660

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

SMART DIAGNOSIS

If a voice message is announced after Smart Diagnosis, refer to the following table to take proper actions.

Voice message Measures (for reference)

Starting HOM-BOT smart diagnosis. Please step away and remove

any items within 1 meter, or about 3 feet.

Clear any object within a 1 m radius around Home Station,

and stay back until the diagnosis is complete.

HOM-BOT needs to be charging in order to activate smart

diagnosis. Please dock the HOM-BOT to the home station.

Move Robot cleaner to the Home Station to recharge it.

Starting HOM-BOT smart diagnosis. Reservation has been

cancelled for smart diagnosis. Please step away and remove any

items within 1 meter, or about 3 feet.

No defect found during diagnosis.

Unable to initiate smart diagnosis due to a low battery. Please try

again after battery is charged.

Try the Smart Diagnosis again after recharging the battery.

Please check that the dust bin and ﬁlter are properly installed.

Open the Dust Bin Cover and examine the bin.

HOM-BOT will not charge due to infrared sensor error. Please

try smart diagnosis again after turning the main power switch on

the back of the HOM-BOT 'Off' then 'On' again. If the problem

continues, please contact LG Electronics customer care.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

HOM-BOT will not charge due to ultrasonic sensor error. Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

HOM-BOT will not charge due to a problem with the cliff sensors

on bottom. Please wipe the sensors clean.

Clean the three Cliff Sensors on the bottom at the front of

the unit.

Please clean the camera sensor on bottom right side. Clean the lens of Camera Sensor on the bottom-right

Please clean the obstacle detecting sensor windows on the left

and right side of the HOM-BOT.

Clean the lens of the Obstacle Sensors on both the left and

right hand sides.

A problem has been found on the Gyro Sensor. Please try smart

diagnosis again after turning the main power switch on the back

of the HOM-BOT 'Off' then 'On' again. If the problem continues,

please contact LG Electronics customer care.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

Please check for foreign material on the left wheel. Check for foreign materials on the left wheel.

Please check for foreign material on the right wheel. Check for foreign materials on the right wheel.

A problem has been found on the left wheel sensor. Please try

smart diagnosis again after turning the main power switch on

the back of the HOM-BOT 'Off' then 'On' again. If the problem

continues, please contact LG Electronics customer care.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

A problem has been found on the right wheel sensor. Please try

smart diagnosis again after turning the main power switch on

the back of the HOM-BOT 'Off' then 'On' again. If the problem

continues, please contact LG Electronics customer care.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

A problem has been found with the brush. Please check for any

foreign material.

Check for any foreign material stuck in the Brush.

A problem has been found in the suction motor. Please try smart

diagnosis again after turning the main power switch on the back

of the HOM-BOT 'Off' then 'On' again. If the problem continues,

please contact LG Electronics customer care.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

A problem has been found in the acceleration sensor. Please try

smart diagnosis again after turning the main power switch on

the back of the HOM-BOT 'Off' then 'On' again. If the problem

continues, please contact LG Electronics customer care.

Run Smart Diagnosis again and, if the same message is

announced, contact an LG Electronics service center.

In order to listen to the smart diagnosis result again, please press

the charging button. To stop, please press the stop button.

If you need to repeat the diagnosis result, press the 'Home'

button, or press 'Stop' button to ﬁnish the diagnosis.

Smart diagnosis mode will be turned off.

Smart Diagnosis mode will not operate with the mop plate

attached. Please try again after removing it.

Run Smart Diagnosis again after removing the Mop Plate.

Smart diagnosis has failed to complete its diagnostics. Please

try again after turning the main power switch on the back of the

HOM-BOT 'Off' then 'On' again.

Turn the main power switch OFF and then ON again to

resume the diagnosis. Do NOT touch the robot or disturb its

operation until the diagnosis is complete.

Please check if the charging terminal is damaged or dirty.

Clean the bottom of the machine and Charging Terminal on Home Station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

LG VPARQUET Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von LG VPARQUET

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info