Bedienungsanleitung Liebherr CBNd 5223 (Seite 8 von 26) (Englisch)

802976

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

5 Energy saving

-Always ensure good ventilation. Do not obstruct ventila‐

tion openings or grilles.

-Never block air slits in the fan.

-Do not install the appliance in direct sunlight or next to a

stove, heater or similar heat source.

-Energy consumption depends on installation conditions

such as the ambient temperature (see 1.3 Range of appli‐

ance use) . A warmer ambient temperature can increase

the energy consumption.

-Avoid opening the appliance door for any longer then

necessary

-The lower the temperature is set the higher the energy

consumption.

-Sort your food items: home.liebherr.com/food.

-All food stored in the appliance should be well wrapped

and covered. This prevents frost buildup.

-Only take food out for as long as necessary so that it

does not get too warm.

-Insertion of warm foods: first let the food cool down to

room temperature.

-Defrost frozen food in the fridge

-For longer periods of absence, use HolidayMode (see

HolidayMode) .

6 Use

6.1 Controls and displays

The display provides a quick overview of the temperature

setting and the status of functions and settings. You can

control the functions and settings either by deactivating/

activating them or by selecting a value.

6.1.1 Status display

Fig. 4

(1) Fridge compartment

temperature display

(2) Freezer compartment

temperature display

The Status display shows the set temperatures and is the

home display. From there, you can navigate to the options

and settings.

6.1.2 Navigation

Navigate in the menu to access the individual functions. An

audible signal sounds after confirming a function or setting.

If no selection is made after 10 seconds the display

switches to the Status display.

The appliance is operated with the buttons next to the

display.

Fig. 5

(1) Left/right navigation

arrow

(2) Confirm

Left/right navigation arrow Fig. 5 (1):

-Navigating in the menu. After the last menu page, it goes

back to the first one.

Confirm Fig. 5 (2):

-Activating/deactivating a function.

-Opening a submenu.

-Confirming a selection. After confirmation the display

switches back to the menu.

Back to the Status display: in the fastest possible manner:

-Close and open the door.

-or wait 10 seconds. The display changes to the Status

display.

6.1.3 Operating structure

The controls are explained by a template. The display

changes depending on the function or settings.

Menu without submenu

Fig. 6

(1) Status deactivated /

status activated white

bar in the top area

(3) Menu: Function name or

menu: Setting name

(2) Symbol or selected

value

Menu with submenu

Fig. 7

(1) Menu: Function name

or menu: Setting name

(3) Symbol or selected value

(2) Status (4) Submenu: Function name

or submenu: Setting

name

(2) Off / On

You can navigate as follows:

-Navigate with the left/right navigation arrow Fig. 5 (1).

-Press Confirm Fig. 5 (2) to go to the submenu Fig. 7 (4).

•Navigate with the left/right navigation arrow Fig. 5 (1).

Energy saving

8 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr CBNd 5223 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CBNd 5223

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info