Bedienungsanleitung Liebherr CBNPes 3967 PremiumPlus (Seite 7 von 26) (Englisch)

597388

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Always stand the appliance backed directly to the wall using

the enclosed wall spacers (see below).

The appliance may be moved only when it is empty.

Do not install the appliance without assistance.

The more R 600a refrigerant there is in the appliance, the

larger the room in which the appliance is standing needs to

be. In rooms that are too small, a flammable mix of gas and

air may be created if there is a leak. According to the EN

378 standard, every 11 g of R 600a refrigerant requires at

least 1 m

space in the room for the appliance. The amount

of refrigerant in your appliance is on the type plate inside the

appliance.

Detach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

Remove the protective film from the outside of the appli-

ance.

NOTICE

The stainless steel doors are provided with a high-quality

surface coating and must not be treated using the accompa-

nying care product.

Otherwise the surface coating will be affected.

Wipe the coated door surfaces using a soft, clean cloth

only.

Apply a stainless steel cleaner only to the stainless steel

side walls evenly, wiping with the grain. Subsequent

cleaning becomes easier as a result.

Wipe side walls with a paint finish using a soft, clean

cloth only.

Remove the protective film from the decorative trims and

drawer fronts.

Remove all transit supports.

The spacers supplied with some appliances must be used to

achieve the stated energy consumption. These will extend the

depth of the appliance by approx. 35 mm. The appliance is fully

functional if the spacers are not used, but does have a slightly

higher energy consumption.

In the case of an appliance with

enclosed wall spacers, mount the

wall spacers on the back of the

appliance at the top left and right.

Dispose of packaging material (see 4.6) .

Align the appliance so that it

stands firmly and on a level by

applying the accompanying

spanner to the adjustable-

height feet (A) and using a

spirit level.

Then support the door: Extend

the adjustable foot at the turn

hinge (B) until it rests on the

floor and then make a further

90° turn.

Note

Clean the appliance (see 6.2) .

If the appliance is installed in a very damp environment,

condensate may form on the outside of the appliance.

Always see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

Ensure that the following tools are to hand:

Torx® 25

Torx® 15

Screwdriver

Cordless screwdriver, if necessary

Second person for fitting work, if needed

4.3.1 Detaching the upper soft stop mecha-

nism*

For appliances with soft stop mechanism start with this item.

For appliances without soft stop mechanism start with item

(see 4.3.2) .

Fig. 4

Open the upper door.

NOTICE

Risk of damage!

If the door seal is damaged, the door may fail to close properly

and the cooling will be inadequate.

Do not damage the door seal with the screwdriver!

Disengage and remove the faceplate

Fig. 4 (1)

using a flat-

blade screwdriver.

The faceplate is attached over the soft stop bracket.

Fig. 5

Push the faceplate over the soft stop bracket

Fig. 5 (4)

in the

direction of the appliance.

Snap the safety lock

Fig. 5 (2)

into the oblong hole.

The safety lock prevents the hinge from snap-closing.

Using a screwdriver, disengage the cover on the hinge side

Fig. 5 (5)

as far as the first detent.

The pin becomes visible.

Press the pin

Fig. 5 (3)

out from underneath.

Press the soft stop bracket

Fig. 5 (4)

towards the door.

Fully detach the cover on the hinge side

Fig. 5 (5)

and

remove it.

Putting into operation

* Depending on model and options 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr CBNPes 3967 PremiumPlus Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CBNPes 3967 PremiumPlus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info