Bedienungsanleitung Liebherr CBNstc 579i (Seite 30 von 36) (Englisch)

804797

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

uInsert the axles Fig. 83 (1) on the EasyTwist-Ice in the

guides and push the rear side Fig. 83 (2) until the lug

engages.

uPush in the EasyTwist-Ice drawer.

WARNING

Risk of poisoning due to contaminated water!

uFill the water tank with potable water only.

uFill the water tank and insert it. (see 7.11.1 Filling the

water tank)

With unfiltered water:

uDispose of ice cubes that were produced within 24 hours

of the first ice cube production.

With filtered water:

uDispose of ice cubes that were produced within 48 hours

of the first ice cube production.

8.6.7 Cleaning the IceMaker*

There are various options for cleaning the IceMaker.

We recommend cleaning in the following situations:

qInitial commissioning

qIf out of use for longer than 5 days.*

Make sure that the following requirements are met:

qIceMaker drawer is emptied.

qIceMaker drawer is fully inserted.

qThe IceMaker has been activated. (see 6.2 Operating

logic)

On first use or if not used for prolonged periods

Clean the IceMaker with TubeClean.

uPut an empty 1.5 l vessel (max. height 10 cm) in the

drawer under the IceMaker.

uActivate the TubeClean function. (see 6.2 Operating logic)

wThe rinse process is prepared (max. 60 min.): The symbol

flashes.

wWater pipes are rinsed: Symbol flashes.

wRinsing process is complete: Function turns off automati‐

cally.

uTake out the IceMaker drawer and remove the container.

uClean the IceMaker drawer with warm water and a little

detergent.

uPush in the IceMaker drawer.

wIce cube production starts automatically.

Without water filter*

uDispose of any ice cubes that are produced within 24

hours of the first ice cube production.*

With water filter:*

uDispose of any ice cubes that are produced within 48

hours of the first ice cube production.*

-or-

uDraw 2 l of water from the InfinitySpring and dispose of

it.*

When cleaning is required

Clean the IceMaker manually.

uRemove the IceMaker drawer and clean with warm water

and a little detergent.

uPush in the IceMaker drawer.

wIce cube production starts automatically.

8.6.8 After cleaning

uWipe dry the appliance and items of equipment

uConnect and switch on the appliance.

uActivate SuperFrost (see 6.3 Functions) .

When the temperature is sufficiently cold

uPlace the food inside.

uRepeat cleaning regularly.

9 Customer support

9.1 Technical specifications

Temperature zone

Cool: 3 °C to 9 °C

BioFresh 0 °C to 3 °C

BioFresh Profes‐

sional*

(Fish & SeaFood)*

-2 °C to 0 °C*

Possible settings (see Fish &

Seafood-Safe *) :*

0 °C | 0 °C*

-2 °C | 0 °C*

-2 °C | -2 °C*

Freezing -26 °C to -15 °C

Maximum freezing quantity/24 h

Freezer See “Freezing capacity …/24 h” on

the type plate

Max. equipment capacity

Equipment Appliance

width

550 mm

(see instal‐

lation

instruc‐

tions,

appliance

dimen‐

sions)

Appliance

width

600 mm

(see

installa‐

tion

instruc‐

tions,

appliance

dimen‐

sions)

Appliance

width

700 mm

(see instal‐

lation

instruc‐

tions, appli‐

ance

dimen‐

sions)

Partial pull-out

freezer compart‐

ment*

(see 7.6.1 Drawer

on telescopic rails)

12 kg* 15 kg* --*

Ice cube production with IceMaker*

Ice cube produc‐

tion/24 h

At a temperature of -18 °C: 1.2 kg of

ice cubes

Maximum ice cube

production/24 h

When the MaxIce function is active:

1.5 kg of ice cubes

Ice cube production with EasyTwist-Ice*

Time required at -18 °C approx. 5.5 h

Time required with SuperFrost activated approx. 3 h

Time required to reach various temperatures with Vario‐

Temp

Initial tempera‐

ture

Target tempera‐

ture

Time required to

reach target temper‐

ature

-18 °C 0 °C >8 h

-18 °C 8 °C >12 h

8 °C 14 °C >6 h

14 °C -18 °C >4 h

Customer support

30 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr CBNstc 579i Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CBNstc 579i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info