Bedienungsanleitung Liebherr CNef 4335 (Seite 26 von 28) (Englisch)

716866

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

uChange the position of the appliance or the source of heat.

The internal light does not come on.

→The appliance is not switched on.

uSwitch the appliance on.

→The door was open for longer than 15 minutes.

uThe internal light switches itself off automatically after about

15 minutes if the door is open.

→The LED illumination is faulty or the cover is damaged:

WARNING

Risk of injury due to electric shock!

Live parts are located under the cover.

uHave the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the

purpose.

WARNING

Danger of injury by LED lamp!

The light intensity of the LED lighting corresponds to risk group

RG 2.

If the cover is defective:

uDo not look into the illumination with optical lenses from the

immediate proximity. This can cause injury to the eyes.

The door seal is defective or needs to be replaced for

another reason.

→The door seal can be replaced. It can be replaced without

the need for special tools.

uContact Customer Service (see 6 Maintenance) :

The unit has iced up or condensation has formed.

→The door seal may have also slipped out of its groove.

uCheck to ensure that the door seal is seated properly in the

groove.

8 Messages

Error messages and reminders are displayed by an

audible signal and a message on the screen. The

audible signal gets louder and louder when error

messages appear. It only stops when the message is

confirmed. Highest priority messages are displayed first

if several occur at the same time. Each message must

be cleared separately.

The message stays in the menu field as long as it is active or

the fault is not eliminated.

Note

Details on the message can be displayed again via the menu

field.

uPress menu.

uPress the message symbol.

uThe display switches to the next message when you press

one. After the last active message the display switches to

the home screen.

Door alarm

An audible warning sounds if the door is open for

longer than 60 seconds. The door alarm symbol

appears on the display. The audible warning stops

automatically when the door is closed.

The audible warning can be switched off when the

door is open. The audible alarm is switched off while

the door is open.

uPress the door alarm symbol.

wThe door alarm stops.

wThe display switches to the home screen.

uClose the door.

Temperature alarm

An audible signal sounds if the temperature is not cold

enough. The temperature alarm symbol appears on

the display.

The temperature had risen too high during the last few

hours or days. When the fault is eliminated the appli-

ance continues to work at the last temperature setting.

The reason for too high a temperature may be:

-hot, fresh food was inserted

-too much warm room air flowed in when rearranging and

removing food

-the power was cut off for a while

-the appliance is faulty

uOpen the door.

uPress the temperature alarm symbol.

wThe audible signal stops. The warmest temperature reached

during the malfunction is displayed on the screen.

uPress the screen or wait for 30 seconds.

wThe display switches to the home screen. Arrows and the

temperature alarm symbol appear in the relevant tempera-

ture field . In addition the messages symbol is

displayed in the menu field .

uCheck the food for quality. Do not consume spoiled food. Do

not re-freeze defrosted food,

uClose the door.

wThe symbols are greyed out when the target temperature is

reached.

If the alarm status persists or the temperature cannot be reset

independently:

(see 7 Malfunctions) .

Power cut

An audible warning sounds. The power cut symbol

appears on the display.

The temperature had risen too high over the last few

hours or days due to a power cut or power interrup-

tion. When the power is restored the appliance

continues to work at the last temperature setting. Acti-

vated reminders are retained.

uOpen the door.

uPress the power cut symbol.

wThe audible signal stops. The warmest temperature reached

in the freezer compartment during the power cut is displayed

on the screen.

uPress the screen or wait for 30 seconds.

wThe display switches to the home screen. Arrows and the

symbol temperature alarm appear in the relevant tempera-

ture field . The messages symbol is also shown in the

menu field .

uCheck the food for quality. Do not consume spoiled food. Do

not re-freeze defrosted food,

uClose the door.

wThe symbols are greyed out when the target temperature is

reached.

Appliance faults

An audible warning sounds. The appliance fault

symbol appears on the display with the relevant error

code.

An appliance component indicates a fault.

uOpen the door.

uNote down the fault code.

uPress the appliance fault symbol.

wThe audible signal stops. The display switches to the home

screen.

uClose the door.

uContact Customer Services (see 6 Maintenance) .

Messages

26 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr CNef 4335 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CNef 4335

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info