Bedienungsanleitung Liebherr CNef 4835 (Seite 15 von 28) (Englisch)

715307

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Note

The manufacturer recommends:

uStore frozen produce at -18 °C or colder.

Connect and switch on appliance approx. 2 hours before

loading for the first time.

4.7.1 Switch on appliance

If the standby symbol is displayed over the whole screen:

uPress the standby symbol.

wThe appliance is switched on. The display switches to the

home screen.

wThe appliance is set to the displayed temperatures. This is

shown by down arrows.

If the standby symbol is displayed in the fridge compart-

ment and the freezer compartment fields:

uPress the Standby symbol in the freezer compartment field

or the fridge compartment field.

wThe appliance is switched on.

wThe appliance is set to the displayed temperatures. This is

shown by down arrows.

If the screen is black:

uTouch the screen.

wThe standby symbol appears on the whole screen.

uPress the standby symbol.

wThe appliance is switched on. The display switches to the

home screen.

wThe appliance is set to the displayed temperatures. This is

shown by down arrows.

4.7.2 Switching the fridge compartment on

The standby symbol is displayed in the fridge compartment

field.

uPress the standby symbol in the fridge compartment field.

wThe fridge compartment is switched on.

wThe fridge compartment is set to the displayed temperature.

This is shown by down arrows.

4.8 SmartDeviceBox

SmartDeviceBox: Start-up instruc-

tionswww.smartdevice.liebherr.com/install

If the SmartDevice box (SDB) is inserted correctly the menu

below appears. The device is supplied with WLAN activated.

To use more WiFi options,

open the WIFI menu.

Fig. 28

uPress WIFI.

wThe WIFI menu opens.

Turning on/off WiFi

Fig. 29

uUse the slider at the bottom right to turn on/off WIFI

wSlider to OFF = WIFIis disabled.

wSlider to ON = WIFIis enabled.

WIFI INFO

Call up the status of the

SmartDevice box.

Fig. 30

uPress the OK button.

wThe WIFI INFO screen opens.

wThe following statuses

can be displayed:

Fig. 31

wSSID: ***WPS*** = The SmartDevice box is in WPS mode

for 3 minutes. An automatic connection to the SmartDevice

box can be established via the router.

wSSID: LHSDB_xxxxxxxxx = the SmartDevice box is in

manual connection mode for 30 minutes. The SmartDe-

vice box transmits a private network to which you can

connect to send WLAN data.

wSSID: empty = The SmartDevice box is in sleep mode.

Please reset the WIFI and connect your SmartDevice box

to the home network.

wSSID: TP-LINK_2D43A2 or Fritz!Box7069 = The SmartDe-

vice box is connected to the home network.

WIFI RESET

Resetting the SmartDevice

box to the default settings.

Fig. 32

uConfirm with OK.

wThe SmartDevice box is reset to the default settings.

Showing the WiFi status on the Home screen

Status: WiFi on & connected

Fig. 33

uThe WiFi indicator is white.

wWiFi is on.

wThe home network and the Liebherr server are connected.

Status: WiFi on & connecting

uThe WiFi display shows

a clock.

Fig. 34

wWiFi is on.

wThere is no connection to the home network and/or the

Liebherr server.

Status: WiFi on & disconnected

Putting into operation

* Depending on model and options 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr CNef 4835 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CNef 4835

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info