Bedienungsanleitung Liebherr CNel 4813-21 (Seite 9 von 11) (Englisch)

710164

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

7 Malfunctions

Your appliance is designed and manufactured for a long life span

and reliable operation. If a malfunction nonetheless occurs during

operation, check whether it is due to a handling error. In this case

you will have to be charged for the costs incurred, even during

the warranty period. You may be able to rectify the following faults

yourself:

Normal noises in the appliance:

Running noise due to speed-regulated compressors.

9 Disposing of the appliance

The appliance contains some reusable materials

and should be disposed of properly - not simply with

unsorted household refuse. Appliances which are no

longer needed must be disposed of in a professional

and appropriate way, in accordance with the current

local regulations and laws.

When disposing of the appliance, ensure that the refrigeration

circuit is not damaged to prevent uncontrolled escape of the

refrigerant it contains (data on type plate) and oil.

u Disable the appliance.

u Pull out the plug.

u Cut through the connecting cable.

* according to model and design

Decommissioning / disposing of the appliance

A bubbling or splashing sound from the coolant owing

through the coolant circuit.

A quiet clicking, when the cooling unit (motor) switches itself on

and o automatically.

Brief humming noise, slightly louder:

- When the motor switches on, when SuperFrost is switched

on, if fresh food has been recently stored or the door has been

open for a long period, the freezing capacity automatically

increases.

- High ambient temperature (s. 1.2)

Deep humming - Noise of air owing through the fan.

The compressor runs for a long time:

- It switches to a lower speed when it requires a lower cooling

capacity, to save energy.

- SuperFrost is switched on.

A LED on the bottom rear of the appliance (at the

compressor) ashes regularly every 15 seconds*.

- The inverter is equipped with a diagnostic LED.

The ashing is normal.

External surfaces warm. The heat from the cooling circuit is

used to avoid condensate.

Faults that you can remedy yourself:

The appliance does not function:

- The appliance is not switched on.

u Plug the plug into the mains socket correctly, check fuse

Vibration noises, if the appliance is not set up rmly on the oor.

u Align the appliance with the adjustable feet.

Temperature is not cold enough:

- Appliance door is not fully closed.

u Close appliance door.

- Ventilation and aeration insucient.

u Clear and clean the ventilation grille.

- High ambient temperature

u see 1.2.

- Excessive quantity of fresh food stored without actuating

SuperFrost.

u see 5.6.4.

- The appliance was opened too frequently or for too long.

u Wait to see if the appliance goes back to the required

temperature by itself. If not, contact customer services (see

maintenance).

- Temperature set incorrectly.

u Set colder and check after 24 hours.

- Appliance is set up too close to a heat source.

Change the location of the appliance or adjust the heat source.

The interior light does not light up.

- Appliance is not switched on.

u Switch on the appliance.

- The door was open for longer than 15 minutes.

u Interior light switches o automatically if the door stays open

for approx. 15 minutes.

Icing up or condensate forming.

- The door seal may have also slipped out of its groove.

8 Decommissioning

8.1 Switching o the appliance

Note

u To switch o the entire appliance you only need to switch

o the freezer section. The fridge section is automatically

switched o with it.

8.1.1 Switching o the freezer section

u Press On/O button for the freezer section Fig. 12 (9) for at

least 3s.

 The temperature displays are dark. The entire appliance is

switched o.

8.1.2 Switching o the fridge section

u Press On/O button for the fridge section Fig. 12 (1) for at

least 3s.

 The interior lighting goes out.

 The temperature display of the fridge section is dark.

Note

u If only the fridge section is to be switched o, e.g. during

holiday periods, always make sure that the temperature

display for the freezer section is illuminated.

8.2 Taking the appliance out of service

u Empty the appliance.

u Switch o the appliance (see “Decommissioning”).

u Unplug the mains plug.

u Clean the appliance (see 6.2).

u Leave the door open to prevent odour.

u Check the door seal.

With the following faults, contact customer

service:

- The door seal is defective or requires replacement for

another reason. Door seal exchangeable.

- DEMO is shown in the temperature display.

- LED lighting is defective or the cover is damaged.

WARNINGS:

Risk of injury due to electric shock!

Live parts are located under the cover.

• Have the LED interior light changed or repaired only by the

customer service or by specialized personnel trained for the

purpose.

Danger of injury by LED lamp!

The light intensity of the LED lighting corresponds to risk group

RG 2.

If the cover is defective:

• Do not look into the illumination with optical lenses from the

immediate proximity. This can cause injury to the eyes.

designation Fig. 13 (1), service no. Fig. 13 (2) and serial no.

Fig. 13 (3).

 This will make it possible to provide fast and accurate service.

u Leave the appliance plugged in until customer service arrives.

 The food will stay cold for longer.

u Pull out the plug (do not tug on the connection cable here) or

switch o the circuit breaker.

Liebherr CNel 4813-21 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr CNel 4813-21

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info