Bedienungsanleitung Liebherr FNb 5056 (Seite 11 von 22) (Englisch)

804875

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Appliance status with active SabbathMode

There is no door alarm.

There is no temperature alarm.

The defrost cycle only works for the specified time without

taking account of appliance use.

After a power failure, the appliance returns to

SabbathMode.

Appliance status

Note

This appliance has certification from the “Institute for

Science and Halacha”. (www.machonhalacha.co.il)

You can find a list of STAR-K-certified appliances at

www.star-k.org/appliances.

Activating SabbathMode

WARNING

Danger of food poisoning from spoiled food!

If you have SabbathMode activated and a power failure

occurs, no message appears in the status display about the

power failure. Once the power is restored, the appliance

continues to operate in SabbathMode. The power failure

may mean that food spoils and the consumption of this food

could lead to food poisoning.

After a power failure:

uDo not consume food that was frozen and has thawed

out.

uCall up the settings menu. (see 6.2 Control concept)

uSwipe left or right until corresponding function is

displayed.

Fig. 12

uComplete the steps (see Fig. 12) .

wSabbathMode is activated.

wStatus display continuously shows SabbathMode.

Deactivating SabbathMode

uCall up the settings menu. (see 6.2 Control concept)

uSwipe left or right until corresponding function is

displayed.

Fig. 13

uComplete the steps (see Fig. 13) .

wSabbathMode is deactivated.

EnergySaver

This function activates or deactivates the energy-saving

mode. When you activate this function, the energy

consumption decreases and the temperature increases by

2 °C in the appliance. The food remains fresh, but the shelf

life is shortened.

Temperature zone Recommended

setting

Temperature when

EnergySaver activated

-18 °C -16 °C

Temperatures

Activating EnergySaver

uSwipe left or right until corresponding function is

displayed.

Fig. 14

uComplete the steps (see Fig. 14) .

wEnergy-saving mode is activated.

Deactivating EnergySaver

uSwipe left or right until corresponding function is

displayed.

Fig. 15

uComplete the steps (see Fig. 15) .

wEnergy-saving mode is deactivated.

Status light (status display)

This setting activates and deactivates the status light

(status display). After you have activated the status light,

the colour of the light indicates the status of the appliance

when the door is closed. When the door is open, the status

light is inactive.

When you start up the appliance, the status light is deacti‐

vated by default.

Status light Status of the appliance

Blue light The appliance is working perfectly.

Red, pulsating light

Audible signal

Power failure (see Power cut)

Temperature alarm (see Temperature

alarm)

Error (see Error)

Activating/deactivating settings

uActivate/deactivate settings. (see 6.2.3 Activating/deac‐

tivating settings)

wActivated: The status light lights up blue or red when the

door is closed.

wDeactivated: The status light does not light up.

Display brightness

Set the brightness level of the display.

You can set the following brightness levels:

-40%

-60%

Controls

* Depending on model and options 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr FNb 5056 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr FNb 5056

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info