Bedienungsanleitung Liebherr FNe 4224 (Seite 17 von 26) (Englisch)

805264

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

7.3.1 Removing / inserting the glass shelf

Make sure that the following requirements are fulfilled:

qGlass shelf under the drawer: The drawer has been

removed. (see 7.1 Drawers)

qPull-out board under IceTower: IceTower has been

removed. (see 7.2 Pull-out board with IceTower*) *

Removing glass shelf

Fig. 36 Example illustration of glass shelf

uLift glass shelf at the front. Fig. 36 (1)

uTake out glass shelf to the front. Fig. 36 (2)

Inserting glass shelf

Fig. 37 Example illustration of glass shelf

uPosition glass shelf at an angle behind the stoppers. (see

Fig. 91)

uLower glass shelf.

uSlide in glass shelf to the back.

7.4 EasyTwist-Ice*

The EasyTwist-Ice produces ice cubes when the water tank

is inserted.

The EasyTwist-Ice is solely intended for the production of

ice cubes for in standard household amounts.

Note

Do not change the position of the EasyTwist-Ice.

Ensure that the following conditions are met:

-The EasyTwist-Ice has been cleaned (see 8.3.5 Cleaning

the EasyTwist-Ice*)

-The water tank has been cleaned.

-The EasyTwist-Ice drawer is fully inserted.

7.4.1 Filling the water tank

WARNING

Impure water!

Poisoning.

uOnly fill with potable water.

NOTICE

Sugar-content liquids!

Damage to EasyTwist-Ice.

uOnly fill with cold drinking water.

Note

Using filtered, decarbonised water ensures the best-tasting

drinking water for your ice cubes.

This water quality can be achieved using a table water filter

of the kind available in trade retail outlets.

uAlways fill the water tank only with filtered, decarbonised

drinking water.

The EasyTwist-Ice is supplied with water from the water

tank.

Fig. 38

uLift up the water tank at the rear Fig. 38 (1) and remove to

the top Fig. 38 (2).

uFill with drinking water up to the marking.

uInsert the water tank by reversing the steps described

above.

7.4.2 Producing ice cubes

The production volume depends on the freezer temperature.

The colder the temperature, the more ice cubes that can be

produced in a certain period.

Maximum capacity of the ice cube drawer – 40 cubes (2x ice

cube production).

Time required for ice cube production – at least 5 hours.

Releasing the ice cubes

uTurn the knob to the right up to its stop limit.

uIf necessary, repeat this step several times and turn the

knob a little more.

7.5 IceMaker*

The IceMaker will produce ice cubes for household use only.

Ensure that the following conditions are met:

-IceMaker is cleaned (see 8 Maintenance) .

-IceMaker drawer is cleaned.

-IceMaker drawer is fully inserted.

7.5.1 Producing ice cubes

The volume depends on the freezing temperature. The

colder the temperature, the more ice cubes the system can

produce in a certain time period.

After the IceMaker is turned on for the first time, it can take

up to 24 hours for the first ice cubes to be made.

uActivate the IceMaker function (see 6.2 Control concept) .

Features

* Depending on model and options 17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr FNe 4224 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr FNe 4224

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info