Bedienungsanleitung Liebherr FNe 5026 (Seite 21 von 26) (Englisch)

805266

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Fig. 52

uPress all lugs Fig. 52 (1) in succession and remove the lid

Fig. 52 (2).

uClean the ice cube drawer, water tank and EasyTwist-Ice

with warm water and a little detergent.

uAssemble the EasyTwist-Ice.

Fig. 53

uPush the axles Fig. 53 (1) on the EasyTwist-Ice into the

guides and push the rear side Fig. 53 (2) until the lugs

engage.

uPush in the EasyTwist-Ice drawer.

WARNING

Impure water!

Poisoning.

uOnly fill with potable water.

uFill the water tank with water and insert it.

(see 7.4.1 Filling the water tank)

With non-filtered water:

uDispose of any ice cubes that were made within 24 hours

of the first ice cubes that were produced.

With filtered water:

uDispose of any ice cubes that were made within 48 hours

of the first ice cubes that were produced.

8.3.6 Cleaning the IceMaker*

There are various options for cleaning the IceMaker.

Cleaning is required in the following cases:

qInitial operation

qIf out of use for more than 5 days.*

Ensure that the following conditions are met:

qIceMaker drawer is emptied.

qIceMaker drawer is in place.

qThe IceMaker is activated. (see 6.2 Control concept)

First use or after a long period of non-use

Clean the IceMaker with the TubeClean function.

uPlace a 1.5 l empty container (max. height 10 cm) into the

drawer under the IceMaker.

uActivate the TubeClean function. (see 6.2 Control

concept)

wThe rinse process is prepared (max. 60 min.): Symbol

flashes.

wWater pipes are rinsed: Symbol flashes.

wRinsing process is complete: Function turns off automati‐

cally.

uRemove the IceMaker drawer and remove the container.

uClean the IceMaker drawer with warm water and a little

detergent.

uPush the IceMaker drawer in.

wThe system starts making ice cubes automatically.

uDispose of any ice cubes that were made 24 hours after

the first ice cubes.

If cleaning is required

Clean the IceMaker by hand.

uRemove the IceMaker drawer and clean with warm water

and a little detergent.

uPush the IceMaker drawer in.

wThe system starts making ice cubes automatically.

8.3.7 After cleaning

uWipe the appliance and the components dry.

uConnect and switch on the appliance.

uActivate SuperFrost (see 6.3 Functions) .

The temperature is cold enough:

uPlace the food inside.

uRepeat cleaning regularly.

9 Customer help

9.1 Technical specifications

Temperature range

Freeze -28 °C to -15 °C

Maximum freezer quantity / 24 hrs

Freezer compart‐

ment

See the type plate under “Freezer

goods … /24 hours”

Maximum component capacity

Features Appliance

width

550 mm

(see instal‐

lation

instruc‐

tions,

appliance

dimen‐

sions)

Appliance

width

600 mm

(see

installa‐

tion

instruc‐

tions,

appliance

dimen‐

sions)

Appliance

width

700 mm

(see instal‐

lation

instruc‐

tions, appli‐

ance

dimen‐

sions)

Drawer on moulded

rib

(see 7.1.2 Drawer

on moulded rib)

14 kg 19 kg 19 kg

Bottom drawer

(see 7.1.3 Bottom

drawer)

-- 11 kg 19 kg

Customer help

* Depending on model and options 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr FNe 5026 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr FNe 5026

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info