Bedienungsanleitung Liebherr FNf 4204 (Seite 14 von 26) (Englisch)

805268

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

uStop alarm: Confirm the message.

-or-

uClose the door.

Power cut

This message appears if the freezer temperature increased

due to a power cut. After the power is restored, the appli‐

ance continues to work at the set temperature.

uStop alarm: Confirm the message.

wTemperature alert appears (see Temperature alarm) .

Temperature alarm

This message appears if the temperature does not match

the set temperature.

Variations in temperature could be because:

-Hot, fresh food was inserted.

-Too much warm room air flowed in when rearranging and

removing food.

-The power was cut off for a while.

-The appliance is faulty.

When the fault is eliminated the appliance continues to

work at the set temperature.

uConfirm the display.

wThe highest temperature is shown.

uConfirm display again.

wThe status display is displayed.

wThe current temperature is shown.

Error

This message appears if there is a fault with the appliance.

An appliance component indicates a fault.

uOpen the door.

uNote down the fault code.

uConfirm the message.

wThe signal tone stops.

wThe status display appears.

uClose the door.

uContact customer service. (see 9.4 Customer Services)

6.4.2 Message

Insert IceMaker drawer*

This message appears if the IceMaker drawer is open.

uPush in the IceMaker drawer.

wThe message disappears.

wThe IceMaker produces ice cubes.

6.4.3 DemoMode

If “D” appears on the display, demo mode is on. This option

is designed for retailers, as it turns off all the cooling func‐

tions.

Stopping DemoMode

If you see the following running in the display:

uConfirm the display within the countdown.

wDemoMode is off.

If the timer is not running:

uUnplug the appliance.

uPlug the appliance in again.

wDemoMode is off.

7 Features

7.1 Drawers

You can remove the drawers for cleaning.

You can remove the drawers to use VarioSpace.

The way to remove/insert the drawers varies depending

on the pull-out system. Your appliance can contain various

pull-out systems.

Note

The energy consumption increases and the cooling power

goes down if ventilation is not sufficient.

uLeave the bottom drawer in the appliance!

uAlways leave the fan air vents clear on the back wall!

7.1.1 Top tilting drawer*

When you pull out the top drawer, it tilts forward. This gives

you a better view into the drawer. The function depends on

the height of the appliance.

Removing drawer

Fig. 21

uPull out drawer as far as it will go.

uLift drawer at the front.

uLift drawer from below.

uRemove drawer to the front.

Inserting drawer

Fig. 22

uGuide drawer around the upper stoppers. Fig. 22 (1)

uPlace drawer at an angle behind the lower stoppers onto

moulded rib. Fig. 22 (2)

uLower drawer.

uSlide to the back.

7.1.2 Drawer on moulded rib

The drawer runs directly on the moulded rib. There are no

rails.

Removing drawer

Fig. 23

uPull out drawer as far as it will go.

uLift up drawer at the front. Fig. 23 (1)

uRemove drawer to the front. Fig. 23 (2)

Features

14 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr FNf 4204 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr FNf 4204

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info