Bedienungsanleitung Liebherr G 1223 Comfort (Seite 7 von 12) (Englisch)

561379

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

4.6 Connecting the appliance

NOTICE

Failure to connect properly

Damage to the electronics.

Do not use a standalone inverter.

Do not use an energy saving plug.

WARNING

Failure to connect properly

Fire hazard.

Do not use an extension cable.

Do not use distributor blocks.

The type of current (alternating current) and voltage at the

installation site have to conform with the data on the type plate

(see Appliance at a glance).

The socket must be properly earthed and fused. The tripping

current for the fuse must be between 10 A and 16 A.

The socket must be easily accessible so that the appliance can

be quickly disconnected from the supply in an emergency. It

must be outside the area of the rear of the appliance.

Check the electrical connection.

Plug in the power plug.

4.7 Switching on the appliance

Press the On/Off button

Fig. 3 (1)

The appliance is switched on. The temperature display and

Alarm symbol

Fig. 3 (7)

flash until the temperature is cold

enough.

If “DEMO” is displayed, demo mode is activated. Please

contact the after sales service.

5 Control

5.1 Brightness of the temperature

display

You can adjust the brightness of the temperature display to the

light conditions of the room in which the appliance is installed.

5.1.1 Adjusting the brightness

The backlight can either be switched off or set to one of 5

levels. The backlight is switched off ex works.

To activate the setting mode: Press the SuperFrost button

Fig. 3 (4)

for about 5 seconds.

The menu symbol

Fig. 3 (6)

shines and the child lock symbol

Fig. 3 (9)

flashes.

Press the setting button

Fig. 3 (2)

to select the brightness

function.

The child lock symbol

Fig. 3 (9)

goes out and the brightness

symbol

Fig. 3 (8)

flashes.

To confirm: Briefly press the SuperFrost button

Fig. 3 (4)

The brightness symbol

Fig. 3 (8)

shines.

Using the setting button

Fig. 3 (2)

, select either "off" or the

brightness wanted. The more display fields of the tempera-

ture display that light up, the brighter it is. If no field is lit up, it

means "off".

To confirm: Press the SuperFrost button

Fig. 3 (4)

The brightness symbol

Fig. 3 (8)

flashes.

The brightness is adjusted to the new value.

To deactivate the setting mode: Press the On/Off button

Fig. 3 (1)

-or-

Wait for 5 minutes.

The brightness symbol

Fig. 3 (8)

and the menu symbol

Fig. 3 (6)

go out.

The temperature is indicated again in the temperature

display.

5.2 Child proofing

The child-proofing function enables you to make

sure that the appliance is not inadvertently switched

off by playing children.

5.2.1 To activate child lock

To activate the setting mode: Press the SuperFrost button

Fig. 3 (4)

for about 5 seconds.

The menu symbol

Fig. 3 (6)

shines and the child lock symbol

Fig. 3 (9)

flashes.

Briefly press the SuperFrost button

Fig. 3 (4)

to select the

child lock function.

The child lock symbol

Fig. 3 (9)

shines. The

-15 °C and -21 °C LEDs shine in the temperature

display.

Briefly press the SuperFrost button

Fig. 3 (4)

to activate the

child lock.

The child lock symbol

Fig. 3 (9)

flashes. The -15 °C and

-21 °C LEDs go out.

To deactivate the setting mode: Press the On/Off button

Fig. 3 (1)

-or-

Wait for 5 minutes.

The menu symbol

Fig. 3 (6)

goes out and the temperature is

displayed again in the temperature display. The child lock

symbol

Fig. 3 (9)

shines.

5.2.2 To deactivate child lock

To activate the setting mode: Press the SuperFrost button

Fig. 3 (4)

for about 5 seconds.

The menu symbol

Fig. 3 (6)

shines and the child lock symbol

Fig. 3 (9)

flashes.

Briefly press the SuperFrost button

Fig. 3 (4)

to select the

child lock function.

The child lock symbol

Fig. 3 (9)

shines. The

-18 °C LED shines in the temperature display.

Briefly press the SuperFrost button

Fig. 3 (4)

to deactivate

the child lock.

The child lock symbol

Fig. 3 (9)

flashes.

To deactivate the setting mode: Press the On/Off button

Fig. 3 (1)

-or-

Wait for 5 minutes.

The menu symbol

Fig. 3 (6)

goes out and the temperature is

displayed again in the temperature display. The child lock

symbol

Fig. 3 (9)

no longer shines.

5.3 Temperature alarm

The temperature display and the alarm symbol

Fig. 3 (7)

flash at the same time.

The cause of the temperature being too high may be:

warm fresh food was placed inside

Control

* Depending on model and options 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr G 1223 Comfort Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr G 1223 Comfort

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info