Bedienungsanleitung Liebherr GNP 3013 (Seite 6 von 14) (Englisch)

597533

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Fig. 4

Before you connect the appliance, report any damage

immediately to the delivery company.

The floor of the installation site must be horizontal and even.

Do not install the appliance in direct sunlight, next to an

oven, radiator or similar.

The best place for installation is a dry and well ventilated

room.

Install the appliance with the rear panel up against the wall

and always use the supplied wall spacers (see below).

Only ever move the appliance when it is empty.

The surface supporting the appliance must be at the same

level as the surrounding floor.

Do not install the appliance on your own.

The more coolant there is in the appliance, the larger the

room in which the appliance is installed must be. If the room

is too small, any leak may create a flammable mixture of gas

and air. For each 8 g of coolant the installation space must

be at least 1 m

. Information on the coolant is on the model

plate inside the appliance.

Detach the connecting cable from the rear of the appliance,

removing the cable holder at the same time because other-

wise there will be vibratory noise!

NOTICE

The stainless steel doors are provided with a high-quality

surface coating and must not be treated using the accompa-

nying care product.*

Otherwise the surface coating will be affected.

Wipe the coated door surfaces using a soft, clean cloth

only.

Apply a stainless steel cleaner only to the stainless steel

side walls evenly, wiping with the grain. Subsequent

cleaning becomes easier as a result.

Wipe side walls with a paint finish using a soft, clean

cloth only.

Remove all transit supports.

The spacers supplied with some appliances must be used to

achieve the stated energy consumption. These will extend the

depth of the appliance by approx. 35 mm. The appliance is fully

functional if the spacers are not used, but does have a slightly

higher energy consumption.

In the case of an appliance with

enclosed wall spacers, mount the

wall spacers on the back of the

appliance at the top left and right.

Dispose of packaging material (see 4.5 Disposing of pack-

aging) .

Align the appliance so that it

stands firmly and on a level by

applying the accompanying

spanner to the adjustable-

height feet (A) and using a

spirit level.

Note

Clean the appliance (see 6.2 Cleaning the appliance) .

If the appliance is installed in a very damp environment,

condensate may form on the outside of the appliance.

Always see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

Ensure that the following tools are to hand:

Torx 25

Torx 15

Screwdriver

Open-ended spanner included in supply package

Second person for fitting work, if needed

CAUTION

Risk of injury if the door tips!

Take good hold of the door.

Set down the door carefully.

Unscrew the securing screw on

the bottom right turn hinge.

Open the door.

Hold the door on the handle side

and at the bottom and lift it.

The bearing pin

Fig. 5 (21)

should

come out of the turn hinge

Fig. 6 (2)

If the bearing bolt

Fig. 5 (21)

doesn't undo press it out from

underneath.

Fig. 5

Swing door out at the bottom and remove it.

Fig. 6

Putting into operation

6 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr GNP 3013 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr GNP 3013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info