Bedienungsanleitung Liebherr GNP1076 (Seite 10 von 14) (Englisch)

805278

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

6.2 Cleaning the appliance

Clean the appliance regularly.

WARNING

Risk of injury and damage as a result of hot steam!

Hot steam can lead to burns and can damage the surfaces.

uDo not use any steam cleaners!

NOTICE

Incorrect cleaning damages the appliance!

uDo not use cleaning agents in concentrated form.

uDo not use any scouring or abrasive sponges or steel

wool.

uDo not use any sharp or abrasive cleaning agents, nor

any that contain sand, chloride or acid.

uDo not use chemical solvents.

uDo not damage or remove the type plate on the inside of

the appliance. It is important for the customer service.

uDo not pull off, bend or damage cables or other compo‐

nents.

uDo not allow any cleaning water to enter the drain

channel, ventilation grille or electrical parts.

uPlease use soft cleaning cloths and a universal pH-

neutral cleaning agent.

uPlease use cleaning and care products suitable for

contact with foodstuffs in the appliance interior.

uEmpty appliance.

uPull out the power plug.

uClean the vent grille regularly.

wDust deposits increase energy consumption.

uClean plastic outer and inner surfaces with lukewarm

water and a little washing-up liquid.

uOnly use a soft clean cloth to wipe side walls with a

paint finish. In the case of heavy soiling, use lukewarm

water with neutral cleaning agent.

uUse only a soft clean cloth to wipe door surfaces with a

paint finish. In the case of heavy soiling, use a little water

or neutral cleaning agent. A micro-fibre cloth can be used

optionally.

uClean drawers by hand with lukewarm water and a little

washing up liquid.

uClean other items of equipment by hand with lukewarm

water and a little washing-up liquid.

After cleaning:

uWipe dry the appliance and items of equipment.

uConnect the appliance and switch it on again.

uSwitch on SuperFrost (see 5.8 SuperFrost) .

When the temperature is sufficiently cold:

uPut the food back inside.

6.3 Customer service

First check whether you can rectify the fault yourself

(see 7 Malfunctions) . If you cannot rectify the problem,

contact Customer Services. You can find the address in the

enclosed Customer Service Directory.

WARNING

Unprofessional repair!

Injuries.

uHave any repairs and action - not expressly specified -

on the appliance and mains cable carried out by service

personnel only. (see 6 Maintenance)

uA damaged mains cable may only be replaced by the

manufacturer, the manufacturer’s Customer Service or a

similarly qualified person.

uIn the case of appliances with an IEC connector, the

change may be made by the customer.

uRead the appliance

designation Fig. 7 (1),

service No. Fig. 7 (2)

and serial No.

Fig. 7 (3) off the

model plate located

inside the appliance

on the left-hand

side.

Fig. 7

uNotify the customer service, specifying the fault, appli‐

ance designation Fig. 7 (1), service No. Fig. 7 (2) and serial

No. Fig. 7 (3).

wThis will help us to provide you with a faster and more

accurate service.

uKeep the appliance closed until the customer service

arrives.

wThe food will stay cool longer.

uPull out the mains plug (not by pulling the connecting

cable) or switch off the fuse.

7 Malfunctions

Your appliance is designed and manufactured for a long

life span and reliable operation. If a malfunction nonethe‐

less occurs during operation, check whether it is due to a

handling error. In this case you will have to be charged for

the costs incurred, even during the warranty period. You

may be able to rectify the following faults yourself:

Appliance does not work.

→The appliance is not switched on.

uSwitching on the appliance.

→The power plug is not properly inserted in the wall

socket.

uCheck power plug.

→The fuse of the wall socket is not in order.

uCheck fuse.

The compressor runs for a long time.

→The compressor switches to a low speed when little cold

is needed. Although the running time is increased as a

result, energy is saved.

uThis is normal in energy-saving models.

→SuperFrost is activated.

uThe compressor runs for longer in order to rapidly cool

the food. This is normal.

A LED on the bottom rear of the appliance (at the

compressor) flashes regularly every 15 seconds*.

→The inverter is equipped with a diagnostic LED.

uThe flashing is normal.

Excessive noise.

→Due to the various speed steps, speed-regulated*

compressors can generate different running noises.

uThe sound is normal.

Malfunctions

10 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr GNP1076 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr GNP1076

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info