Bedienungsanleitung Liebherr ICBc 5182 (Seite 12 von 34) (Englisch)

805404

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Fig. 12

wThe connection and other settings are reset to the

factory settings.

Temperature

The temperature depends on the following factors:

-the number of times the door is opened

-The duration the door is opened

-the room temperature of the installation location

-the type, temperature and amount of food

Temperature zone Recommended setting

Fridge 5 °C

Freezing

compartment

-18 °C

BioFresh (see BioFresh B-Value)

Setting the temperature

Fig. 13

uSet the value. (see 6.2 Operating logic) .

wThe set temperature is shown on the bottom right of the

display.

Switching off the temperature zone

You can switch off the fridge compartment separately.

If you switch off the freezing compartment, all temperature

zones are switched off.

uDeactivate IceMaker. *

uSet the value. (see 6.2 Operating logic) .

appears.

Setting the temperature in the BioFresh

You can set the temperature using the BioFresh B-Value in

the customer menu. (see BioFresh B-Value)

BioFresh B-Value

In the delivery condition of the appliance, the value is set to

B5. The status indicator on the display shows the appro‐

priate target temperature in the BioFresh.

You can change this value slightly if a higher or lower

ambient temperature makes it necessary. When setting the

value, note:

Value Description

B1 Lowest temperature

B1-B4 The temperature can drop to below 0 °C, so food

can freeze easily.

B5 Default temperature

B9 Highest temperature

BioFresh B-Value

Choosing the setting

uMake your settings in the Customer menu (see 6.2 Oper‐

ating logic) .

D-Value

The D-Value is preset for your appliance and may not be

changed.

SuperCool

Select this function for the maximum cooling setting, to

reach lower cooling temperatures.

This function is relevant to the fridge section Fig. 1 (A)

Use:

-Cool large amounts of food quickly.

Activating/deactivating settings

uUsing the fridge section: activate the function when you

add the goods.

uActivating/deactivating (see 6.2 Operating logic) .

-or-

uActivate/deactivate using the SmartDevice app.*

The function automatically turns off. The appliance goes

back to normal mode. The temperature adjusts itself to the

set level.

SuperFrost

Select this function for the maximum freezing setting, to

reach lower freezing temperatures.

This function is relevant to the freezer section Fig. 1 (C).

Use:

-To freeze more than 2 kg fresh food a day.

-Freezing fresh food quickly to the core.

-Increasing the cold reserves in the stored goods before

defrosting the appliance.

Activating/deactivating settings

With a small volume of frozen goods:

uActivate 6 hours before use.

With the maximum volume of frozen goods:

uActivate 24 hours before use.

uActivating/deactivating (see 6.2 Operating logic) .

-or-

Use

12 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr ICBc 5182 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr ICBc 5182

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info