Bedienungsanleitung Liebherr ICBdi 5122 (Seite 22 von 26) (Englisch)

805588

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Noise Possible cause Type of noise

Humming The appliance

is cooling. The

volume depends

on the cooling

output.

Normal operating

noise

Suction noises Soft-closing door

is being opened

and closed.

Normal operating

noise

Humming and

rustling

The fan is running. Normal operating

noise

Clicking Components are

switched on and

off.

Normal switching

noise

Rattling or

humming

Valves or flaps are

working.

Normal switching

noise

Noise Possible

cause

Type of noise Lifting

Vibration Improper

installation

Defective

noise

Check the

installation.

Level the

appliance.

Noise Possible

cause

Type of noise Lifting

Rattling Components,

items inside

the appliance

Defective

noise

Secure

components.

Leave

enough

space

between the

items.

9.3 Technical fault

Your appliance is designed and built to ensure it works reli‐

ably and has a long service life. In the unlikely event that

a fault occurs during operation, please check whether it is

due to an operating error. If so, you will be charged for the

callout and repair costs even if it falls within the warranty

period.

You can fix the following faults yourself.

9.3.1 Appliance function

Defect Cause Remedy

The appliance is

not working.

→ The appliance is not switched on. uSwitch the appliance on.

→The power plug is not properly

plugged into the socket.

uCheck the power plug.

→There is something wrong with the

power outlet fuse.

uCheck the fuse.

→ Power cut uKeep the appliance closed.

uProtecting food: Lay freezer packs on top of the food or

use another freezer if the power is off for a prolonged

period.

uDo not re-freeze defrosted food,

→The appliance plug does not fit the

appliance properly.

uCheck the appliance plug.

Temperature is not

cold enough.

→The appliance door is not closed

properly.

uClose the appliance door.

→ Not enough ventilation. uKeep ventilation grille clear, and clean it.

→The ambient temperature is too

high.

uSolution: (see 1.4 Appliance range of use) .

→The appliance was opened too

many times or for too long.

uWait to see if the required temperature corrects itself.

If not, contact Customer Service (see 9.4 Customer Serv‐

ices) .

→Too much fresh food was placed

inside without SuperFrost.

uSolution: (see SuperFrost)

→ The temperature is set incorrectly. uTurn down the temperature and check after 24 hours.

→The appliance is too close to a heat

source (oven, radiator, etc).

uMove the appliance or the heat source.

→The appliance was not correctly

installed in the recess.

uCheck if the appliance was installed correctly and that

the door closes properly.

The door seal is

defective or needs

→The door seal can be replaced. It

can be replaced without the need

for special tools.

uContact Customer Services (see 9.4 Customer Services) .

Customer help

22 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr ICBdi 5122 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr ICBdi 5122

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info