Bedienungsanleitung Liebherr ICBNd 5173 (Seite 14 von 34) (Englisch)

805408

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

Temperature zone Recom‐

mended

setting

Temperature

when Ener‐

gySaver activated

Fridge compart‐

ment

5 °C 7 °C

Freezer compart‐

ment

-18 °C -16 °C

Temperatures

Activating EnergySaver

uSwipe left or right until corresponding function is

displayed.

Fig. 14

uComplete the steps (see Fig. 14) .

wEnergy-saving mode is activated.

Deactivating EnergySaver

uSwipe left or right until corresponding function is

displayed.

Fig. 15

uComplete the steps (see Fig. 15) .

wEnergy-saving mode is deactivated.

HydroBreeze*

HydroBreeze creates a fine mist in the drawer every 90

minutes for 4 seconds when the door is closed. This func‐

tion is also activated when you open the door. The function

is not activated when the appliance is delivered.

Use:

-For storing loose salad, vegetables and fruit with a high

moisture content.

Choose from these options:

•1: Duration of function while opening door 4 s

•2: Duration of function while opening door 6 s

•3: Duration of function while opening door 8 s

•Off: HydroBreeze is off.

Activating/deactivating the function

uActivating/deactivating (see 6.2 Control concept) .

-or-

uActivating/deactivating in the Liebherr SmartDevice-

App.*

IceMaker / MaxIce*

You can activate or deactivate ice cube production with the

IceMaker function. Use the MaxIce function to increase the

number of ice cubes in the IceMaker.

More information on the number

of ice cubes:

(see 9.1 Technical

specifications)

More information on the size of

the ice cubes:

(see Ice cubes*)

More information on cleaning the

lines of the IceMaker:

(see TubeClean*)

Activating IceMaker

Make sure that the following requirements are fulfilled:

qThe water supply is established at the fixed water

connection. See installation instructions.*

qIceMaker is put into operation. (see 7.13 IceMaker*)

uSwipe left or right until corresponding function is

displayed.

Fig. 16

uComplete the steps (see Fig. 16) .

-or-

uActivate with the SmartDevice app.

wIceMaker is activated. It can take up to 24 hours for the

IceMaker to produce the first ice cubes.

Activating the IceMaker with MaxIce

If you have not activated the IceMaker function before,

make sure that the following requirements are met:

qThe water supply is established at the fixed water

connection. See installation instructions.*

qIceMaker is put into operation. (see 7.13 IceMaker*)

uSwipe left or right until corresponding function is

displayed.

Fig. 17

uComplete the steps (see Fig. 17) .

-or-

uActivate with the SmartDevice app.

wThe IceMaker is activated with MaxIce.

Changing between the IceMaker and MaxIce

If you have activated the IceMaker and would like to change

to MaxIce:

uSwipe left or right until corresponding function is

displayed.

Controls

14 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr ICBNd 5173 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr ICBNd 5173

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info