Bedienungsanleitung Liebherr ICNe 5103 (Seite 22 von 28) (Englisch)

805418

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

8.1.1 Removing the FreshAir carbon filter

Fig. 56

uPull out the compartment Fig. 56 (1).

uRemove the carbon filter Fig. 56 (2).

8.1.2 Inserting the FreshAir carbon filter

Fig. 57

uInsert the carbon filter as shown in the diagram

Fig. 57 (1).

wThe carbon filter clicks into place.

If the carbon filter is pointing downwards:

uPush the compartment in Fig. 57 (2).

wThe carbon filter is now ready for use.

8.2 Disassembling / assembling pull-

out systems

8.2.1 Notes on disassembly

You can disassemble some of the pull-out systems for

cleaning. Your appliance can contain a variety of pull-out

systems.

The following pull-out systems can be disassembled or

cannot be disassembled:

Pull-out system can be disassembled /

cannot be disassembled

Drawer on appliance base or

glass shelf

cannot be disassembled

Drawer on rails cannot be disassembled

Fully extendible* cannot be disassembled*

Partial pull-out fridge compart‐

ment*

cannot be disassembled*

8.3 Defrosting the appliance

WARNING

Improper defrosting of the appliance!*

Injuries and damage.

uDo not use mechanical equipment or other methods to

speed up the defrosting process other than those recom‐

mended by the manufacturer.

uDo not use electrical heating or steam-cleaning appli‐

ances, naked flames or defroster sprays to defrost.

uDo not use sharp objects to remove ice.

8.3.1 Defrosting the fridge compartment

Defrosting is performed automatically. The water from the

thawing process drains through the outlet and evaporates.

Water drops or a thin layer of frost or ice can form on the

back wall; this is a completely normal part of the applian‐

ce’s function. This must not be removed.*

A layer of frost or ice can from briefly due to the energy-

optimised control of the device.*

A layer of frost or ice can from briefly due to the energy-

optimised control of the device.*

uClean the drain opening regularly (see 8.4 Cleaning the

appliance) .

8.3.2 Defrosting the freezer compartment with

NoFrost*

Defrosting is performed automatically with the NoFrost

system. The moisture is deposited on the evaporator, is peri‐

odically defrosted and evaporates.

The appliance does not need to be defrosted.

8.3.3 Defrosting the freezer compartment

manually*

A layer of frost or ice forms after prolonged use.

The following factors promote the formation of frost or ice:

- The appliance is opened frequently.

- Hot food is put in.

One day before defrosting:

uActivate SuperFrost (see 6.3 Functions) .

wFrozen goods have a “residual coldness”.

uSwitch off the appliance .

uPull out the mains plug or switch off the fuse.

uWrap the frozen produce in newspaper or blankets and

store in a cool place.

uPlace a pan of hot water (not

boiling) on the middle shelf.

wThis speeds up the defrosting process.

uLeave the appliance door open during defrosting.

uRemove loosened pieces of ice.

uMake sure that there is no melted ice water in the

cabinet.

uSoak up the melted ice water with a sponge or cloth

several times as necessary.

uClean the appliance (see 8.4 Cleaning the appliance) .

Maintenance

22 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr ICNe 5103 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr ICNe 5103

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info