Bedienungsanleitung Liebherr ICSe 5122 (Seite 11 von 28) (Englisch)

805422

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Fig. 11

wThe connection and other settings are reset to the

factory settings.

Temperature

The temperature depends on the following factors:

-The amount of times the door is opened

-How long the door is open for

-The room temperature of the installation site

-The type, temperature and amount of food

Temperature zone Recommended setting

Fridge section 5 °C

Freezer compart‐

ment

-18 °C

Setting the temperature

Fig. 12

uSet the value. (see 6.2 Control concept) .

wSet temperature is shown at the bottom right of the

display.

Switching off a temperature zone

You can switch off the fridge compartment separately.

If you switch off the freezer compartment, all temperature

zones are switched off.

uDeactivate IceMaker. *

uSet the value. (see 6.2 Control concept) .

appears.

D-Value*

Note

Liebherr recommends:*

uOperate the appliance with dry rear panel to avoid visible

condensation and goods freezing to the rear panel or

each other.*

The D-Value specifies whether you are operating your fridge

compartment with or without a dry rear panel. The rear

panel is mounted in the appliance in its delivery condition.

The default setting for the D-Value is D1.*

You can remove the rear panel for cleaning.

(see 8.4.3 Cleaning the dry rear panel*) To operate the appli‐

ance without a rear panel, you need to set the D-Value to

D2.*

Choose the setting*

uSet the value in the customer menu. (see 6.2 Control

concept)

SuperCool

This function selects the lowest cooling temperature. This

gives you colder storage temperatures.

This function is relevant to the fridge section Fig. 1 (A)

Use:

-Cool large amounts of food quickly.

Activating/deactivating the function

uUsing the fridge section: activate the function when you

add the goods.

uActivating/deactivating (see 6.2 Control concept) .

The function automatically turns off. The appliance goes

back to normal mode. The temperature adjusts itself to the

set level.

PowerCool

This function provides the perfect blanket temperature to

cool your food.

This function refers to the fridge section Fig. 1 (A).

Use:

-At higher room temperatures (from approx. 35 °C )

-When humidity is high e.g. on summer days

-When storing moist goods, to avoid condensation

building up inside

Activating/deactivating the function

uActivating/deactivating (see 6.2 Control concept) .

Note

The fan can run even when function is deactivated. This

ensures optimal temperature distribution in the appliance.

wFunction activated: Energy consumption of the appliance

is slightly increased.

SuperFrost

This function selects the lowest freezing temperature. This

gives you colder storage temperatures.

This function refers to the freezer section Fig. 1 (C).

Controls

* Depending on model and options 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr ICSe 5122 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr ICSe 5122

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info