Bedienungsanleitung Liebherr ICSe 5122 (Seite 14 von 28) (Englisch)

805422

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Fig. 19

uComplete the steps (see Fig. 446) .

wMaxIce is activated.

wIf you have not activated the IceMaker function before:

IceMaker is activated.

Deactivating MaxIce

If you deactivate MaxIce, then the IceMaker function is still

activated.

uTap navigation arrow repeatedly until corresponding

function is displayed.

Fig. 20

uComplete the steps (see Fig. 447) .

wMaxIce is deactivated.

TubeClean*

This setting cleans the IceMaker pipes.*

Ensure that the following conditions are met:*

qIceMaker cleaning is ready (see 8.4.5 Cleaning the

IceMaker*) .

Activating the setting*

uActivate the setting in the Customer menu

(see 6.2 Control concept) .

wThe rinse process is ready (max. 60 min.): Symbol flashes.

wWater pipes are rinsed: Symbol flashes.

wRinsing process is complete: Function turns off automati‐

cally.

CleaningMode*

Use this setting to easily clean the appliance.*

This setting refers to the fridge section Fig. 1 (A).*

Use:*

-Clean the fridge section by hand.

What happens on the appliance when this setting is on:*

-The fridge section is switched off.

-The internal light is on.

-Reminders and warnings are not shown. There is no

acoustic signal.

Activating/deactivating settings*

uActivating/deactivating the setting (see 6.2 Control

concept) .

wOn: fridge section is off. Light stays on.

wOff: preset temperature is restored.

After 60 min the setting turns off automatically. The appli‐

ance then continues running in normal mode.

Display brightness

Set the brightness level of the display.

You can set the following brightness levels:

-40%

-60%

-80%

-100%

Choose the setting

uSet the level (see 6.2 Control concept) .

Door alarm

Set the time before the door alarm (see Close the door)

sounds.

The options are as follows:

-1 min

-2 min

-3 min

-Off

Choose the setting

uSet the time (see 6.4 Fault messages) .

Entry lock

This setting prevents unintentional use of the appliance,

e.g. by children.

Use:

-Avoid settings being changed unintentionally.

-Avoid the appliance being switched off unintentionally.

-Avoid the temperature being changed unintentionally.

Activating/deactivating settings

uActivating/deactivating. (see 6.2 Control

concept)

Info

This setting allows the appliance information to be read out

as well as access to the customer menu.

It provides the following information:

-Model name

-Index

-Serial number

-Service number

Show appliance data

uTap the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

information is displayed.

uRead the appliance info.

Reminder

Reminders are given out acoustically by a beep and visually

by a symbol in the display. The signal gets louder until the

alert stops.

Replace FreshAir active carbon filter

This message appears when the air filter needs replacing.

Controls

14 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr ICSe 5122 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr ICSe 5122

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info