Bedienungsanleitung Liebherr IRBAd 5190 (Seite 14 von 34) (Englisch)

805595

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

uSwipe ON in the display.

uPress the display for 3 seconds.

wAutoDoor is activated.

wThe door can be opened by knocking.

wThe door opening angle previously set is still stored.

Changing the door opening angle

You have already configured a door opening angle and want

to change it.

Fig. 17

uSelect the AutoDoor function. Fig. 17 (1)

uSwipe the display until Door position appears. Fig. 17 (2)

uAnzeige antippen.

uTo configure the door opening angle: Open the door to at

least 70°. Fig. 17 (3)

uMake sure the door does not touch any adjacent cabinets

or walls.

uTo confirm the door opening angle: Tap the message in

the display. Fig. 17 (4)

CAUTION

Risk of injury from automatic opening and closing of the

door!

uKeep the door opening area clear.

uDo not reach into the hinge with your hand.

uDo not block the door.

NOTICE

Damage to the drawers and telescopic rails from automatic

closing of the door!

uBefore the door closes: Push the drawers all the way in.

uBefore the door closes and when drawer has been

removed: Push the telescopic rails all the way in.

Fig. 18

uTo start the reference run: Tap the display. Fig. 17 (6)

wThe reference run starts.

wThe display flashes. Fig. 17 (7)

wThe reference run is successful: The display turns blue

for 2 seconds. Fig. 17 (8)

wA confirmation signal sounds.

uConfirm the door opening angle. Fig. 17 (9)

wThe display turns blue. Fig. 17 (10)

wA confirmation signal sounds.

wThe door opening angle is configured.

Using AutoDoor with a smartphone

You want to use a smartphone to open and close the door.

uActivate and configure AutoDoor. (see Activating and

configuring AutoDoor for the first time)

uInstall the SmartDevice app on the smartphone.

uEstablish a WiFi connection to the appliance.

uRegister the appliance in the SmartDevice app: Follow

the instructions in the SmartDevice app.

wThe door can be opened by smartphone in addition to

knocking.

Using AutoDoor with voice control

You want to use a voice command to open and close the

door.

uActivate and configure AutoDoor. (see Activating and

configuring AutoDoor for the first time)

uInstall the SmartDevice app on the smartphone.

uEstablish a WiFi connection to the appliance.

uRegister the appliance in the SmartDevice app: Follow

the instructions in the SmartDevice app.

uInstall the voice assistant.

wThe door can be opened by voice command in addition to

knocking.

You can find detailed information and tutorials

at:

home.liebherr.com/faq-autodoor

SuperCool

This function selects the lowest cooling temperature. This

gives you colder storage temperatures.

This function is relevant to the fridge section Fig. 1 (A)

You can also reach lower temperatures in the 4-star

freezer.*

Controls

14 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr IRBAd 5190 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr IRBAd 5190

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info