Bedienungsanleitung Liebherr IRBd 4120 (Seite 10 von 24) (Englisch)

805329

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Symbol Setting

Cleaning Mode2

Reminders1

Reset2

Switch off 2

uTap the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

desired setting is displayed.

1 Activate setting (shortpress)

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears in the menu.

wSetting is on / off.

2 Activate setting (longpress)

uTo Confirm Fig. 5 (2), press for 3 seconds.

wYou hear the confirmation tone.

wStatus appears in the menu.

wDisplay changes.

6.2.4 Selecting the setting value

With the following settings you can set a value in the

submenu:

Symbol Settings

Brightness

Door alarm

uTap the navigation arrows Fig. 5 (1) repeatedly until

settings appears.

uPress Confirm Fig. 5 (2).

uTap the navigation arrows Fig. 5 (1) repeatedly until the

desired setting is displayed.

uPress Confirm Fig. 5 (2).

uSelect the setting value with the navigation arrows

Fig. 5 (1).

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears briefly in the submenu.

wDisplay switches back to the menu.

6.2.5 Go to the Customer menu

You can see the following settings in the Customer menu:

Symbol Function

BioFresh B-Value 1

C-Value 1*

Software

uPress the navigation arrows Fig. 5 (1) repeatedly until the

settings appear.

uPress Confirm Fig. 5 (2).

uPress the navigation arrows Fig. 5 (1) repeatedly until the

appliance information appears in the display.

uPress Confirm Fig. 5 (2).

uEnter the numerical code 151.

wThe customer menu appears.

uPress the navigation arrows Fig. 5 (1) repeatedly in the

customer menu until the desired setting appears.

1 Select the value

uPress Confirm Fig. 5 (2).

wYou hear the confirmation tone.

wStatus appears briefly in the display.

wDisplay switches back to the menu.

2 Activate the setting

uToConfirm Fig. 5 (2), press for 3 seconds.

wYou hear the confirmation tone.

wStatus appears on the display.

wThe symbol flashes as long as the appliance is working.

6.3 Functions

Turn off appliance

This setting turns off the whole appliance.

Switching off the entire appliance

Fig. 8

uActivating/deactivating (see 6.2 Control concept) .

wOff: Display goes black.

WiFi

Use this function to connect your appliance to the WiFi. You

can then operate it via the SmartDevice app on a mobile

device. You can also use this function to disconnect or reset

the WiFi connection. To connect your appliance to the WiFi,

you need the SmartDeviceBox. For more information about

the SmartDeviceBox and how to use the SmartDevice app:

(see 1.3 SmartDevice)

Note

You cannot use the SmartDeviceBox in the following coun‐

tries: Belarus, Kazakhstan, Russia. The SmartDevice func‐

tion is not available.

Establishing a WiFi connection

Make sure that the following requirements are fulfilled:

qYou have purchased and inserted a SmartDeviceBox.

(see 1.3 SmartDevice)

qYou have installed the SmartDevice app (see

apps.home.liebherr.com).

Controls

10 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr IRBd 4120 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr IRBd 4120

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info