805348
19
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
Fig. 41
uSlide rails in.
uPlace drawer on rails.
uSlide in drawer to the back.
wDrawer latches in audibly at the back.
Partial pull-out fridge compartment*
Removing drawer
Fig. 42
uPull out the drawer halfway. Fig. 42 (1)
uLift drawer at the front. Fig. 42 (2)
uSlide in left rail. Fig. 42 (3)
uSlide in right rail. Fig. 42 (4)
uRemove drawer to the front. Fig. 42 (5)
Fig. 43
If the rails are not yet fully pushed in after removing the
drawer:
uPush the rails in completely.
Inserting drawer
Fig. 44
uSlide rails in.
uPlace drawer on rails.
uSlide in drawer to the back.
7.10 Fruit & Vegetable-Safe cover
The compartment lid can be removed for cleaning.
7.10.1 Removing the compartment lid
Make sure that the following requirements are fulfilled
qBottle shelf is removed (see 7.8 Variable bottle shelf) .
Fig. 45
If the drawers are removed:
uPull the lid up at the front in the retaining parts to the
opening Fig. 45 (1).
uLift from the back and pull it up and out Fig. 45 (2).
7.10.2 Inserting the compartment lid
Fig. 46
If the text THIS SIDE UP is on top:
uInsert the lip of the cover over the opening of the rear
bracket Fig. 46 (1) and click into place Fig. 46 (2).
uPosition the cover where you want it (see 7.11 Humidity
control) .
7.11 Humidity control
You can regulate the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment cover is on the drawer itself and can be
covered with shelves or additional drawers.
Fig. 47
Low air humidity
uOpen the drawer.
uPull the drawer cover to the front.
wIf the drawer is closed: Gap between lid and compart
ment.
uSwitch off HydroBreeze.*
wMoisture levels lower in the Safe.
High air moisture:
uOpen the drawer.
uSlide the compartment cover to the back.
wIf the drawer is closed: The cover seals the compartment.
uActivate the HydroBreeze.*
wMoisture levels rise in the Safe.
If there is too much moisture in the compartment:
uChoose a “low moisture setting”.
-or-
uRemove the moisture with a cloth.
Note
With the “low humidity” setting, the Fruit & Vegetable-Safe
can also be used as a Meat & Dairy-Safe.
uChoose a “low moisture” setting.
Equipment
* Depending on model and options 19
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Liebherr IRBe 4851 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Liebherr IRBe 4851

Liebherr IRBe 4851 Bedienungsanleitung - Deutsch - 30 seiten

Liebherr IRBe 4851 Bedienungsanleitung - Holländisch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info