805363
12
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
Temperature zone Recommended
setting (see
Temperature)
Temperature
when E-Saver
activated
Fridge
compartment
5 °C 7 °C
Temperatures
Activating E-Saver
uTap navigation arrow repeatedly until corresponding
function is displayed.
E-Saver
E-Saver
Fig. 15
uComplete the steps (see Fig. 1527) .
wEnergy-saving mode is activated.
Deactivating E-Saver
uTap navigation arrow repeatedly until corresponding
function is displayed.
E-Saver
E-Saver
Fig. 16
uComplete the steps (see Fig. 1528) .
wEnergy-saving mode is deactivated.
CleaningMode
Use this setting to easily clean the appliance.
This setting refers to the fridge section Fig. 1 (A).
Use:
-Clean the fridge section by hand.
What happens on the appliance when this setting is on:
-The fridge section is switched off.
-The internal light is on.
-Reminders and warnings are not shown. There is no
acoustic signal.
Activating/deactivating settings
uActivating/deactivating the setting (see 6.2 Control
concept) .
wOn: fridge section is off. Light stays on.
wOff: preset temperature is restored.
After 60 min the setting turns off automatically. The appli‐
ance then continues running in normal mode.
Display brightness
Set the brightness level of the display.
You can set the following brightness levels:
-40%
-60%
-80%
-100%
Choose the setting
uSet the level (see 6.2 Control concept) .
Door alarm
Set the time before the door alarm (see Close the door)
sounds.
The options are as follows:
-1 min
-2 min
-3 min
-Off
Choose the setting
uSet the time (see 6.4 Fault messages) .
Entry lock
This setting prevents unintentional use of the appliance,
e.g. by children.
Use:
-Avoid settings being changed unintentionally.
-Avoid the appliance being switched off unintentionally.
-Avoid the temperature being changed unintentionally.
Activating/deactivating settings
uActivating/deactivating. (see 6.2 Control
concept)
Info
This setting allows the appliance information to be read out
as well as access to the customer menu.
It provides the following information:
-Model name
-Index
-Serial number
-Service number
Show appliance data
uTap the navigation arrows Fig. 5 (1) repeatedly until the
settings appear.
uPress Confirm Fig. 5 (2).
uTap the navigation arrows Fig. 5 (1) repeatedly until the
information is displayed.
uRead the appliance info.
Reminder
Reminders are given out acoustically by a beep and visually
by a symbol in the display. The signal gets louder until the
alert stops.
Replace FreshAir active carbon filter*
This message appears when the air filter needs replacing.
uChange the air filter every six months.
uConfirm the message with OK.
wThe service interval resets.
Controls
12 * Depending on model and options
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Liebherr IRd 4121 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Liebherr IRd 4121

Liebherr IRd 4121 Bedienungsanleitung - Deutsch - 26 seiten

Liebherr IRd 4121 Bedienungsanleitung - Holländisch - 24 seiten

Liebherr IRd 4121 Bedienungsanleitung - Französisch - 26 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info