Bedienungsanleitung Liebherr IRd 4150 (Seite 19 von 24) (Englisch)

805364

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

8.1.1 Removing the FreshAir carbon filter

Fig. 50

uPull out the compartment Fig. 50 (1).

uRemove the carbon filter Fig. 50 (2).

8.1.2 Inserting the FreshAir carbon filter

Fig. 51

uInsert the carbon filter as shown in the diagram

Fig. 51 (1).

wThe carbon filter clicks into place.

If the carbon filter is pointing downwards:

uPush the compartment in Fig. 51 (2).

wThe carbon filter is now ready for use.

8.2 Disassembling / assembling pull-

out systems

8.2.1 Notes on disassembly

You can disassemble some of the pull-out systems for

cleaning. Your appliance can contain a variety of pull-out

systems.

The following pull-out systems can be disassembled or

cannot be disassembled:

Pull-out system can be disassembled /

cannot be disassembled

Drawer on appliance

base or glass shelf

cannot be disassembled

Drawer on rails cannot be disassembled

Partial pull-out fridge

compartment

cannot be disassembled

Pull-out board with

bottle basket*

can be disassembled

(see 8.2.2 Pull-out board with

bottle basket*) *

8.2.2 Pull-out board with bottle basket*

Disassembling pull-out system

Make sure the following prerequisites are met:

qBottle basket has been removed. (see 7.10 Pull-out board

with bottle basket*)

qGlass shelf has been removed. (see 7.11 Glass shelves*)

Fig. 52 Glass shelf with rails

uPush up front click-in hooks. Fig. 52 (1)

uMove the pull-out rails to the side Fig. 52 (2) and to the

rear Fig. 52 (3).

Installing pull-out system

Fig. 53 Glass shelf with rails

uHook in rail at the back. Fig. 53 (1)

uHook in rail at the front. Fig. 53 (2)

8.3 Defrosting the appliance

WARNING

Improper defrosting of the appliance!

Injuries and damage.

uDo not use mechanical equipment or other methods to

speed up the defrosting process other than those recom‐

mended by the manufacturer.

uDo not use electrical heating or steam-cleaning appli‐

ances, naked flames or defroster sprays to defrost.

uDo not use sharp objects to remove ice.

Defrosting is performed automatically. The water from the

thawing process drains through the outlet and evaporates.

Water drops or a thin layer of frost or ice can form on the

back wall; this is a completely normal part of the applian‐

ce’s function. This must not be removed.

A layer of frost or ice can from briefly due to the energy-

optimised control of the device.

uClean the drain opening regularly (see 8.5 Cleaning the

appliance) .

8.4 Defrosting the freezer compartment

manually*

A layer of frost or ice forms after prolonged use.

The following factors promote the formation of frost or ice:

- The appliance is opened frequently.

- Hot food is put in.

uSwitch off the appliance .

uPull out the mains plug or switch off the fuse.

uWrap the frozen produce in newspaper or blankets and

store in a cool place.

Maintenance

* Depending on model and options 19

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr IRd 4150 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr IRd 4150

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info