Bedienungsanleitung Liebherr IXRFA 5175 (Seite 14 von 64) (Englisch)

805606

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Note

This appliance has certification from the “Institute for

Science and Halacha”. (www.machonhalacha.co.il)

You can find a list of STAR-K-certified appliances at

www.star-k.org/appliances.

Activating SabbathMode

WARNING

Danger of food poisoning from spoiled food!

If you have SabbathMode activated and a power failure

occurs, no message appears in the status display about the

power failure. Once the power is restored, the appliance

continues to operate in SabbathMode. The power failure

may mean that food spoils and the consumption of this food

could lead to food poisoning.

After a power failure:

uDo not consume food that was frozen and has thawed

out.

uCall up the settings menu. (see 6.2 Control concept)

uSwipe left or right until corresponding function is

displayed.

Fig. 19

uComplete the steps (see Fig. 929) .

wSabbathMode is activated.

wStatus display continuously shows SabbathMode.

Deactivating SabbathMode

uCall up the settings menu. (see 6.2 Control concept)

uSwipe left or right until corresponding function is

displayed.

Fig. 20

uComplete the steps (see Fig. 930) .

wSabbathMode is deactivated.

EnergySaver

This function activates or deactivates the energy-saving

mode. When you activate this function, the energy

consumption decreases and the temperature increases by

2 °C in the appliance. The food remains fresh, but the shelf

life is shortened.

Temperature zone Recommended

setting

Temperature when

EnergySaver activated

-18 °C -16 °C

Temperatures

Activating EnergySaver

uSwipe left or right until corresponding function is

displayed.

Fig. 21

uComplete the steps (see Fig. 931) .

wEnergy-saving mode is activated.

Deactivating EnergySaver

uSwipe left or right until corresponding function is

displayed.

Fig. 22

uComplete the steps (see Fig. 932) .

wEnergy-saving mode is deactivated.

IceMaker / MaxIce

You can activate or deactivate ice cube production with the

IceMaker function. Use the MaxIce function to increase the

number of ice cubes in the IceMaker.

More information on the number

of ice cubes:

(see 9.1 Technical

specifications)

More information on the size of

the ice cubes:

(see Ice cubes)

More information on cleaning the

lines of the IceMaker:

(see TubeClean)

Activating IceMaker

Make sure that the following requirements are fulfilled:

qThe water supply is established at the fixed water

connection. See installation instructions.

qIceMaker is put into operation. (see 7.4 IceMaker)

uSwipe left or right until corresponding function is

displayed.

Fig. 23

uComplete the steps (see Fig. 933) .

-or-

uActivate with the SmartDevice app.

wIceMaker is activated. It can take up to 24 hours for the

IceMaker to produce the first ice cubes.

Activating the IceMaker with MaxIce

If you have not activated the IceMaker function before,

make sure that the following requirements are met:

qThe water supply is established at the fixed water

connection. See installation instructions.

qIceMaker is put into operation. (see 7.4 IceMaker)

Controls

14 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr IXRFA 5175 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info