Bedienungsanleitung Liebherr IXRFA 5175 (Seite 21 von 64) (Englisch)

805606

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Depending on the equipment, the glass shelf may be

located under the IceTower.

Make sure that the following requirements are fulfilled:

qGlass shelf under the drawer: The drawer has been

removed. (see 7.1 Drawers)

qPull-out board under IceTower: IceTower has been

removed. (see 7.2 Pull-out board with IceTower)

Removing glass shelf

Fig. 51 Example illustration of glass shelf

uLift glass shelf at the front. Fig. 51 (1)

uTake out glass shelf to the front. Fig. 51 (2)

Inserting glass shelf

Fig. 52 Example illustration of glass shelf

uPosition glass shelf at an angle behind the stoppers. (see

Fig. 962)

uLower glass shelf.

uSlide in glass shelf to the back.

7.4 IceMaker

The IceMaker will produce ice cubes for household use only.

Ensure that the following conditions are met:

-IceMaker is cleaned (see 8 Maintenance) .

-IceMaker drawer is cleaned.

-IceMaker drawer is fully inserted.

7.4.1 Producing ice cubes

The volume depends on the freezing temperature. The

colder the temperature, the more ice cubes the system can

produce in a certain time period.

After the IceMaker is turned on for the first time, it can take

up to 24 hours for the first ice cubes to be made.

uActivate the IceMaker function (see 6.2 Control concept) .

uTo make a high number of ice cubes: Activate the MaxIce

function (see 6.2 Control concept) .

uDistribute the ice cubes evenly in the drawer to increase

the capacity.

uClosing the drawer: IceMaker starts making ice cubes

again automatically.

Note

When a certain level is reached in the IceMaker drawer, it

stops producing ice cubes. The IceMaker does not fill the

drawer all the way to the top.

7.5 VarioSpace

Fig. 53

You can remove drawers and glass panels from your appli‐

ance. This provides more room for large food items such as

poultry, joints of meat, large game, and tall baked products.

You can then freeze these items whole for later preparation.

uNote the weight limits on the drawers and glass panels

(see 9.1 Technical specifications) .

7.6 Accessories

7.6.1 Freezer pack

Freezer packs prevent the temperature rising too quickly

should there be a power cut.

The freezer packs are in the drawer.

You can store the freezer packs in the freezer tray.

Using the freezer pack

Fig. 54

When the freezer packs are fully frozen:

uPlace on the frozen goods in the top, front part of the

freezer.

8 Maintenance

8.1 Disassembling / assembling pull-

out systems

8.1.1 Notes on disassembly

You can disassemble some of the pull-out systems for

cleaning. Your appliance can contain a variety of pull-out

systems.

The following pull-out systems can be disassembled or

cannot be disassembled:

Pull-out system can be disassembled /

cannot be disassembled

Drawer on appli‐

ance base or glass

shelf

cannot be disassembled

Maintenance

* Depending on model and options 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr IXRFA 5175 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info