Bedienungsanleitung Liebherr IXRFA 5175 (Seite 24 von 64) (Englisch)

805606

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

uPlace rail hooks onto the openings of the left retaining

part. Fig. 69 (1)

uPush rail forwards. Fig. 69 (2)

wRail latches in audibly.

Install rail without damping mechanism:

uPlace rail hooks onto the openings of the right retaining

part. Fig. 69 (1)

uPush rail forwards. Fig. 69 (2)

wRail latches in audibly.

8.2 Defrosting the appliance

8.2.1 Defrosting with NoFrost

Defrosting is performed automatically with the NoFrost

system. The moisture is deposited on the evaporator, is peri‐

odically defrosted and evaporates.

The appliance does not need to be defrosted.

8.3 Cleaning the appliance

8.3.1 Ready

WARNING

Danger of electric shock!

uRemove the refrigerator connector or interrupt the power

supply.

WARNING

Risk of fire

uDo not damage the refrigeration circuit.

uEmpty the appliance.

uRemove mains connector.

8.3.2 Cleaning the interior

NOTICE

Improper cleaning!

Damage to the appliance.

uOnly use soft cleaning cloths and ph-neutral all-purpose

cleaners.

uDo not uses abrasive sponges or steel wool which may

cause scratches.

uDo not use any sharp or abrasive cleaning agents, nor

any that contain sand, chloride or acid.

uPlastic surfaces: clean by hand with a soft clean cloth,

lukewarm water and a little detergent.

uMetal surfaces: clean by hand with a soft clean cloth,

lukewarm water and a little detergent.

uDrain hole: remove deposits using a thin item (for

example a cotton bud).

8.3.3 Clean the components

NOTICE

Improper cleaning!

Damage to the appliance.

uOnly use soft cleaning cloths and ph-neutral all-purpose

cleaners.

uDo not uses abrasive sponges or steel wool which may

cause scratches.

uDo not use any sharp or abrasive cleaning agents, nor

any that contain sand, chloride or acid.

Clean with a soft, clean cloth, lukewarm water and some

detergent:

- IceTower pull-out board

- Drawer

Please note: Do not remove the magnet on the drawer.

The magnet ensures the functionality of the IceMaker.

- Freezer tray

Clean with a damp cloth:

- Retractable rails

Please note: The grease in the tracks is used for lubrica‐

tion and must not be removed!

Wash in the dishwasher up to 60 °C:

- Ice cube scoop

uTo disassemble components: see the relevant section.

uClean the components.

8.3.4 Cleaning the IceMaker

There are various options for cleaning the IceMaker.

Cleaning is required in the following cases:

qInitial operation

qIf out of use for more than 5 days.

Ensure that the following conditions are met:

qIceMaker drawer is emptied.

qIceMaker drawer is in place.

qThe IceMaker is activated. (see 6.2 Control concept)

First use or after a long period of non-use

Clean the IceMaker with the TubeClean function.

uPlace a 1.5 l empty container (max. height 10 cm) into the

drawer under the IceMaker.

uActivate the TubeClean function. (see 6.2 Control

concept)

wThe rinse process is prepared (max. 60 min.): Symbol

flashes.

wWater pipes are rinsed: Symbol flashes.

wRinsing process is complete: Function turns off automati‐

cally.

uRemove the IceMaker drawer and remove the container.

uClean the IceMaker drawer with warm water and a little

detergent.

uPush the IceMaker drawer in.

wThe system starts making ice cubes automatically.

uDispose of any ice cubes that were made 24 hours after

the first ice cubes.

If cleaning is required

Clean the IceMaker by hand.

uRemove the IceMaker drawer and clean with warm water

and a little detergent.

uPush the IceMaker drawer in.

wThe system starts making ice cubes automatically.

8.3.5 After cleaning

uWipe the appliance and the components dry.

uConnect and switch on the appliance.

uActivate SuperFrost (see 6.3 Functions) .

The temperature is cold enough:

uPlace the food inside.

uRepeat cleaning regularly.

Maintenance

24 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr IXRFA 5175 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info