Bedienungsanleitung Liebherr k 4260 (Seite 17 von 26) (Englisch)

338103

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Remove the cover

Fig. 6 (27)

Fully retract the adjustable-height foot

Fig. 6 (22)

If necessary, tip the appliance back a little with the assistance

of a second person for removal of the bearing pin.

Pull out the bearing pin

Fig. 6 (22)

downwards and forwards.

In so doing, pay attention to the hinge bush

Fig. 6 (20)

Unscrew the turn hinge

Fig. 6 (23)

(2 Torx 25)

Fig. 6 (24)

Unscrew the bearing part

Fig. 6 (26)

(1 Torx 25),

Fig. 6 (28)

Carefully lift off and transfer the cover

Fig. 6 (25)

on the handle

side.

Screw down the turn hinge

Fig. 6 (23)

on the new hinge side,

possibly with the aid of a cordless screwdriver, through the

outer oblong hole and round hole.

Note

If necessary, e.g. to make up for any unevenness in the floor,

the second oblong hole can be used instead of the round hole

for the screw fitting.

Tip the appliance back a little

again and re-insert the bear-

ing pin

Fig. 7 (22)

. The notch

has to point forwards.

Place the cover

Fig. 6 (27)

the opposite side.*

Fig. 7

CAUTION

Risk of injury if the door tips!

The safety lock

(21)

has to engage with the turn hinge at the

side so that the bearing pin and therefore the door are se-

cured.

Snap the safety lock

(21)

onto the turn hinge again.

Put on the hinge bush

Fig. 6 (20)

4.1.5 Transferring the handles

Disengage the spring clip

Fig. 8 (31)

from the upper door and

transfer it to the new hinge side.

Lift the stoppers

Fig. 8 (30)

out of the door bearing bushes and

transfer them.

Fig. 8

Detach the door handles

Fig. 8 (32)

, stoppers

Fig. 8 (33)

and

pressure plates

Fig. 8 (34)

and transfer to the opposite side.

When fitting the pressure plates at the opposite side, pay at-

tention that they engage properly.

4.1.6 Fitting the lower door

Place the lower door from above onto the lower bearing pin

Fig. 6 (22)

Close the door.

Place the plastic cap

Fig. 5 (10)

back onto the middle turn

hinge

Fig. 5 (13)

Place the middle bearing pin

Fig. 5 (11)

in the lower door, on

the new hinge side, through the middle turn hinge

Fig. 5 (13)

4.1.7 Fitting the upper door

Place the upper door on the middle bearing pin

Fig. 5 (11)

Insert the upper turn hinge

Fig. 4 (3)

in the door on the new

hinge side.

Screw down the upper turn hinge (2 Torx 25)

Fig. 4 (4)

. Pos-

sibly make preliminary holes with a bradawl or use a cordless

screwdriver.

Apply the cover

Fig. 4 (1)

and cover

Fig. 4 (2)

to the opposite

side from the outside and snap them into place.

4.1.8 Aligning the doors

Transfer the middle screw of the lower turn hinge

Fig. 6 (23)

into the free oblong hole.

If necessary, align the doors to the appliance housing by way

of the two oblong holes in the lower turn hinge

Fig. 6 (23)

and

middle turn hinge

Fig. 5 (13)

Tighten the screws.

4.2 Water connection

WARNING

Danger of electric shock!

Disconnect the appliance by unplugging it before you connect

it to the water line.

Shut off the water supply before you connect the water feed

lines of the IceMaker.

The connection to the drinking water system may be carried

out only by a qualified gas fitter and plumber.

WARNING

Risk of poisoning!

The water quality has to comply with the drinking water ordi-

nance of the respective country (e.g. 98/8

The IceMaker serves exclusively for making ice cubes in

household quantities and has to be operated with water suit-

able for the purpose.

Putting into operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr k 4260 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr k 4260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info