Bedienungsanleitung Liebherr OKes 1750 (Seite 4 von 14) (Englisch)

804844

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Setting up

The appliance is intended for outdoor use.

NOTICE

At the installation site, the area for the appliance, and particularly

for the mains cable, must be protected from water accumulation

or extreme weather conditions.

• Do not place the appliance in direct sunlight or near cookers,

radiators and similar sources of heat.

• Do not place heat-emitting appliances, e.g. microwave oven,

toaster, etc., on top of the appliance.

• The more coolant there is in the appliance, the larger the room

in which the appliance is installed must be. If the room is too

small, any leak may create a flammable mixture of gas and air.

For each 8 g of coolant the installation space must be at least

1 m³. Information on the coolant is on the model plate inside the

appliance.

Electrical connection

WARNING

Danger of electric shock!

Danger of re caused by moisture!

If live parts or the mains power cable become

damp, a short-circuit may occur.

The socket to which the appliance is connected

must feature an RCCB (residual-current-operated

circuit-breaker).

Only operate the appliance with alternating current (AC).

The permissible voltage and frequency are indicated on the type

plate. The position of the type plate is shown in the section entitled

Description of the appliance.

The socket must be properly earthed and protected by a fuse.

The tripping current of the fuse must be between 10 A and 16 A.

The socket must not be situated behind the appli-

ance and must be easily accessible.

Do not connect the appliance using an exten-

sion cable or extension socket.

Do not use stand-alone inverters (conversion

of direct current to alternating current/three-

phase current) or energy-saving plugs. Risk

of damage to the electronic control system!

Climate class

The climate class [X] specifies the

ambient conditions in which the

appliance can be operated safely.

The climate class [Y] and tempera-

ture class [Z] define the maximum

outline conditions in which the

appliances will operate perfectly.

The climate rating is indicated on the type plate.

[X]

Climate class

Max. room

temperature

Max. relative

humidity

3 25 °C 60 %

4 30 °C 55 %

5 40 °C 40 %

7 35 °C 75 %

The minimum room temperature at the place of installation is 0°C.

[Y]

Climate class

Temperature

[°C]

Relative humidity

[%]

CC1 25,0 60

CC2 32,2 65

CC3 40,6 75

Recommended temperature setting:

[Z]

Temperature class

Temperature setting

[°C]

K1 3,5

K2 2,5

K3 -1,0

K4 +5,0

Description of the appliance

(1) Operating and control elements

(2) Interior light (LED light strip)

(3) Type plate

(4) Adjustable shelves

(5) Pull-out shelf

(6) Adjustable door rack

NOTICE

The maximum load per storage shelf (4) is 15 kg.

The maximum load per pull-out shelf is 15 kg.

The maximum load per door rack is 10 kg.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr OKes 1750 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr OKes 1750

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info