Bedienungsanleitung Liebherr RDsfe 5220 (Seite 11 von 22) (Englisch)

804854

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Note

This appliance has certification from the “Institute for

Science and Halacha”. (www.machonhalacha.co.il)

You can find a list of STAR-K-certified appliances at

www.star-k.org/appliances.

Activating SabbathMode

WARNING

Danger of poisoning from spoiled food!

If you have SabbathMode activated and a power failure

occurs, no message appears in the status display about the

power failure. Once the power is restored, the appliance

continues to operate in SabbathMode. The power failure

may mean that food spoils and the consumption of this food

could lead to food poisoning.

After a power failure:

uDo not consume food that has been frozen and thawed.

uCall up the settings menu. (see 6.2 Operating logic)

uTap the navigation arrow repeatedly until the corre‐

sponding function is displayed.

Fig. 13

uComplete the steps (see Fig. 1945) .

wSabbathMode is activated.

wStatus display continuously shows SabbathMode.

Deactivating SabbathMode

uCall up the settings menu. (see 6.2 Operating logic)

uTap the navigation arrow repeatedly until the corre‐

sponding function is displayed.

Fig. 14

uComplete the steps (see Fig. 1946) .

wSabbathMode is deactivated.

E-Saver

This function activates or deactivates the energy-saving

mode. When you activate this function, the energy

consumption decreases and the temperature increases by

2 °C in the appliance. The food remains fresh, but the shelf

life is shortened.

Temperature zone Recommended

setting (see

Temperature)

Temperature

when E-Saver

activated

Fridge

compartment

5 °C 7 °C

Temperatures

Activating E-Saver

uTap navigation arrow repeatedly until corresponding

function is displayed.

E-Saver

Fig. 15

uComplete the steps (see Fig. 1947) .

wEnergy-saving mode is activated.

Deactivating E-Saver

uTap navigation arrow repeatedly until corresponding

function is displayed.

E-Saver

Fig. 16

uComplete the steps (see Fig. 1948) .

wEnergy-saving mode is deactivated.

CleaningMode

This setting makes it easy to clean the appliance.

This setting is relevant to the fridge section Fig. 1 (A).

Use:

-Clean the fridge section manually.

What happens with the appliance when this setting is on:

-The refrigerator compartment is switched off.

-The internal light is on.

-Reminders and warnings are not shown. There is no

acoustic signal.

Activating/deactivating settings

uActivate/deactivate setting (see 6.2 Operating logic) .

wOn: Fridge compartment is switched off. Light stays on.

wOff: preset temperature is restored.

The setting is automatically deactivated after 60 minutes.

Then the appliance continues operation in normal mode.

Display brightness

With this setting, you can choose a brightness level for the

display.

You can set the following brightness levels:

-40%

-60%

-80%

-100%

Choosing the setting

uSet the level (see 6.2 Operating logic) .

Door alarm

Set the time before the door alarm (see Close the door)

sounds.

Options are as follows:

-1 min

-2 min

Use

* Depending on model and options 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr RDsfe 5220 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr RDsfe 5220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info