Bedienungsanleitung Liebherr Re 5020 (Seite 12 von 22) (Englisch)

804856

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

-3 min

-Off

Choosing the setting

uSet the level (see 6.4 Error messages) .

Entry lock

This setting avoids accidental operation of the appliance,

e.g. by children.

Use:

-Avoid unintentional changing of settings and functions.

-Avoid unintentional switching off of the appliance.

-Avoid unintentional temperature adjustments.

Activating/deactivating settings

uActivating/deactivating (see 6.2 Operating

logic) .

Info

This setting allows the appliance information to be read out

as well as access to the customer menu.

It provides the following information:

-Model name

-Index

-Serial number

-Service number

View appliance data

uPress the navigation arrows Fig. 5 (1) repeatedly until the

settings are displayed.

uPress Confirm Fig. 5 (2).

uPress the navigation arrows Fig. 5 (1) repeatedly until the

information display appears.

uRead the appliance data.

Reminder

Reminders are displayed acoustically by a beep and visually

by a symbol in the display. The signal gets louder until the

alert stops.

Replace the FreshAir active carbon filter

This message appears when the air filter needs replacing.

uReplace the air filter every six months.

uConfirm the message with OK.

wThe service interval resets.

wThe air filter guarantees the air quality in the fridge.

Activate setting

uActivating/deactivating (see 6.2 Operating logic) .

Reset

This function resets all settings to the factory settings. All

settings that you have made thus far will be reset to their

original values.

Activate the setting

uActivating (see 6.2 Operating logic) .

6.4 Error messages

Error messages appear in the display. There are two catego‐

ries of error message:

Category Meaning

Message Reminder of general procedures. You can carry

out these procedures to eliminate the message.

Warning Appears when there are malfunctions. A signal

sounds in addition to the display. The signal

becomes louder until you acknowledge by

tapping the display. You can eliminate simple

defects yourself. For more serious defects, you

must contact customer service.

6.4.1 Warnings

Close the door

This message appears if the door is open too long.

You can set the time before this message appears .

uStop alarm: Confirm the message.

-or-

uClose the door.

Error

This message appears when there is a fault with the appli‐

ance. An appliance component has an error.

uOpen the door.

uTake note of the error code.

uConfirm the message.

wThe signal tone stops.

wThe status display appears.

uClose the door.

uContact customer service. (see 9.4 Customer service)

6.4.2 DemoMode

If “D” appears in the display, demo mode is on. This feature

is designed for retailers. The cooling features are disabled.

Switching off DemoMode

When you see a time counting down:

uConfirm within the countdown.

wDemoMode is off.

If there is no countdown:

uDisconnect the power plug.

uReconnect the power plug.

wDemoMode is off.

Use

12 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr Re 5020 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr Re 5020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info