Bedienungsanleitung Liebherr SFNbde 5227 (Seite 12 von 40) (Englisch)

805282

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Power failure.

This message appears if the freezer temperature rises after a

power outage. When the power outage is over, the appliance

will continue to operate at the last temperature setting.

uStop alarm: Confirm the message.

wTemperature alarm appears (see Temperature alarm) .

Temperature alarm

This message appears if the temperature does not match the

set temperature.

Temperature differences may be caused by:

-Hot fresh food was placed in the appliance.

-When sorting and removing food from the appliance, too

much warm ambient air got in.

-There has been a prolonged power outage.

-The appliance is faulty.

When the cause is eliminated, the appliance will continue to

operate at the last temperature setting.

uConfirm the display.

wWarmest temperature is displayed.

uConfirm the display again.

wThe status display is displayed.

wCurrent temperature is displayed.

Error

This message appears when there is a fault with the appliance.

An appliance component has an error.

uOpen the door.

uTake note of the error code.

uConfirm the message.

wThe acoustic warning ceases

wThe display changes to the Status screen.

uClose the door.

uContact Customer Service (see 9.4 Customer service) .

6.5.2 DemoMode

If “D” appears in the display, demo mode is on. This feature is

designed for retailers. The cooling features are disabled.

Switching off DemoMode

When you see a time counting down:

uConfirm within the countdown.

wDemoMode is off.

If there is no countdown:

uDisconnect the power plug.

uReconnect the power plug.

wDemoMode is off.

7 Equipment

7.1 Drawers

You can remove the drawers for cleaning.

How the drawers are removed and inserted differs depending

on the pull-out system. Your appliance can include a variety of

pull-out systems.

Note

Insufficient ventilation results in an increase in energy

consumption and reduction of the refrigerating performance.

uLeave the bottom drawer in appliance!

uNever obstruct the vents on the interior rear wall!

7.1.1 Remove the drawer

Drawer on molded ribs

Fig. 13

uPull drawer out completely.

uLift at the front

Fig. 13 (1)

uRemove to the front

Fig. 13 (2)

Tilting top drawer*

Fig. 14

uPull drawer out completely.

uLift at the front.

uLift from below.

uRemove to the front.

7.1.2 Inserting the drawer

Drawer on molded ribs

Fig. 15

uPlace drawer on the molded ribs behind the stoppers with

the drawer tiled up at the front

Fig. 15 ()

uLower drawer.

uSlide to the rear.

Tilting top drawer*

Fig. 16

uGuide the drawer around the upper stoppers

Fig. 16 (1)

uPlace the drawer on the molded ribs behind the lower stop-

pers with the drawer tilted up at the front

Fig. 16 (2)

uLower drawer.

uSlide to the rear.

Equipment

12 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SFNbde 5227 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SFNbde 5227

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info