Bedienungsanleitung Liebherr SFNbde 5227 (Seite 28 von 40) (Englisch)

805282

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Symbol Setting

Switch off 2

uPress the navigation arrows

Fig. 5 (1)

repeatedly until the

settings are displayed.

uPress Confirm

Fig. 5 (2)

uPress the navigation arrows

Fig. 5 (1)

repeatedly until the

desired setting is displayed.

1 Activate setting (short press)

uPress Confirm

Fig. 5 (2)

wYou hear the confirmation tone.

wStatus appears in the menu.

wSetting is activated / deactivated.

2 Activate setting (long press)

uPress Confirm

Fig. 5 (2)

for 3 seconds.

wYou hear the confirmation tone.

wStatus appears in the menu.

wDisplay changes.

6.2.4 Selecting the setting value

With the following settings you can set a value in the submenu:

Symbol Settings

Brightness

Door alarm

Temp. unit

uPress the navigation arrows

Fig. 5 (1)

repeatedly until the

settings are displayed.

uPress Confirm

Fig. 5 (2)

uPress the navigation arrows

Fig. 5 (1)

repeatedly until the

desired setting is displayed.

uPress Confirm

Fig. 5 (2)

uSelect the setting value with the navigation arrows

Fig. 5 (1)

uPress Confirm

Fig. 5 (2)

wYou hear the confirmation tone.

wStatus appears briefly in the submenu.

wDisplay switches back to the menu.

6.2.5 Calling up the customer menu

The customer menu provides the following settings:

Symbol Function

D-Value* 1*

Software

uPress the navigation arrows

Fig. 5 (1)

so often until the

settings are displayed.

uPress Confirm

Fig. 5 (2)

uPress the navigation arrows

Fig. 5 (1)

so often until the appli-

ance information appears in the display.

uPress Confirm

Fig. 5 (2)

uCall up the customer menu: Enter the code 151.

uPress the navigation arrows

Fig. 5 (1)

in the customer menu

so often until the desired setting is displayed.

1 Select the setting value

uPress Confirm

Fig. 5 (2)

wYou hear the confirmation tone.

wStatus appears briefly in the display.

wThe display switches back to the menu.

2 Activate setting

uPress Confirm

Fig. 5 (2)

for 3 seconds.

wYou hear the confirmation tone.

wStatus appears in the display.

wThe symbol flashes as long as the appliance is working.

6.3 Functions

Temperature

The temperature depends on the following factors:

-the number of times the door is opened

-The duration the door is opened

-the room temperature of the installation location

-the type, temperature and amount of food

Temperature zone Recommended setting

Fridge 5 °C

Setting the temperature

Fig. 8

uSet the value. (see 6.2 Operating logic) .

wThe set temperature is shown on the bottom right of the

display.

SuperCool

Select this function for the maximum cooling setting, to reach

lower cooling temperatures.

This function is relevant to the fridge section

Fig. 1 (A)

Use:

-Cool large amounts of food quickly.

Activating/deactivating settings

uUsing the fridge section: activate the function when you add

the goods.

uActivating/deactivating (see 6.2 Operating logic) .

The function automatically turns off. The appliance goes back

to normal mode. The temperature adjusts itself to the set level.

Use

8 * Depending on model and options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Liebherr SFNbde 5227 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Liebherr SFNbde 5227

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info